Research Repository

See what's under the surface


Electromagnetic analysis of the lasing thresholds of hybrid plasmon modes of a silver tube nanolaser with active core and active shell (2019)
Journal Article
Natarov, D. M., Benson, T. M., & Nosich, A. I. (2019). Electromagnetic analysis of the lasing thresholds of hybrid plasmon modes of a silver tube nanolaser with active core and active shell. Beilstein Journal of Nanotechnology, 10, 294-304. doi:10.3762/bjnano.10.28

Results from the electromagnetic modeling of the threshold conditions of hybrid plasmon modes of a laser based on a silver nanotube with an active core and covered with an active shell are presented. We study the modes of such a nanolaser that have t... Read More

Holistic appraisal of modeling installed antennas for aerospace applications (2018)
Journal Article
Vukovic, A., Sewell, P., & Benson, T. (2018). Holistic appraisal of modeling installed antennas for aerospace applications. IEEE Transactions on Antennas and Propagation, doi:10.1109/TAP.2018.2884769

This paper uses the Unstructured Transmission Line Modeling Method to investigate near field interactions between a broadband microwave antenna and a platform that arise as a result of antenna installation. The antenna, feed line and the platform are... Read More

Comparative study of praseodymium additives in active selenide chalcogenide optical fibers (2018)
Journal Article
Tang, Z., Sojka, L., Furniss, D., Nunes, J., Sakr, H., Barney, E., …Seddon, A. B. (2018). Comparative study of praseodymium additives in active selenide chalcogenide optical fibers. Optical Materials Express, 8(12), 3910-3926. doi:10.1364/OME.8.003910

The choice of rare earth additive when doping chalcogenide glasses can affect their mid-infrared fiber performance. Three praseodymium additives, Pr-foil, PrCl3 and PrI3 are investigated in Ge-As-Ga-Se fibers. All the fibers are X-ray amorphous and t... Read More

Modeling of resonantly pumped mid-infrared Pr3+-doped chalcogenide fiber amplifier with different pumping schemes (2018)
Journal Article
Shen, M., Furniss, D., Tang, Z., Barney, E. R., Sójka, L., Sujecki, S., …Seddon, A. B. (2018). Modeling of resonantly pumped mid-infrared Pr3+-doped chalcogenide fiber amplifier with different pumping schemes. Optics Express, 26(18), doi:10.1364/OE.26.023641. ISSN 1094-4087

We propose a model for resonantly pumped Pr3+-doped chalcogenide fiber amplifiers which includes excited state absorption and the full spectral amplified spontaneous emission spanning from 2 μm to 6 μm. Based on this model, the observed near- and mid... Read More

Spatiotemporal modeling of mid-infrared photoluminiscence from Terbium (III) ion doped chalcogenide-selenide multimode fibers (2018)
Conference Proceeding
Sujecki, S., Sojka, L., Tang, Z., Barney, E., Furniss, D., Benson, T., & Seddon, A. (2018). Spatiotemporal modeling of mid-infrared photoluminiscence from Terbium (III) ion doped chalcogenide-selenide multimode fibers. In REMAT 2018 5th International Conference on Rare Earth Materials

Mid-infrared (MIR) light has numerous applications in medicine, biology, agriculture, defense and security. Therefore in many laboratories intensive research is being carried out to develop MIR light technology in order to achieve a similar level of... Read More

Experimental investigation of mid-infrared laser action from DY3+ doped fluorozirconate fiber (2018)
Journal Article
Sójka, L., Pajewski, L., Popenda, M., Beres-Pawlik, E., Lamrini, S., Markowski, K., …Sujecki, S. (in press). Experimental investigation of mid-infrared laser action from DY3+ doped fluorozirconate fiber. IEEE Photonics Technology Letters, doi:10.1109/LPT.2018.2832009. ISSN 1041-1135

Efficient continuous-wave laser operation at 2.982 μm is achieved with a Dy3:fluoride fiber pumped using an inhouse-built 1.1 μm ytterbium (III) fiber laser. The laser output power reached is 554 mW, with a maximum slope efficiency of 18% with respec... Read More

Numerical analysis of spontaneous mid-infrared light emission from terbium ion doped multimode chalcogenide fibers (2018)
Journal Article
Sujecki, S., Sojka, L., Pawlik, E., Anders, K., Piramidowicz, R., Tang, Z., …Seddon, A. (2018). Numerical analysis of spontaneous mid-infrared light emission from terbium ion doped multimode chalcogenide fibers. Journal of Luminescence, 199, doi:10.1016/j.jlumin.2018.03.031. ISSN 0022-2313

In this contribution we use a numerical model to study the photoluminescence emitted by Tb3+ doped chalcogenide-selenide glass fibers pumped by laser light at approximately 3 µm. The model consists of the set of ordinary differential equations (ODEs)... Read More

Numerical modelling of Tb3+ doped selenide-chalcogenide multimode fibre based spontaneous emission sources (2017)
Journal Article
multimode fibre based spontaneous emission sources. Optical and Quantum Electronics, 49(12), doi:10.1007/s11082-017-1255-5. ISSN 0306-8919

A model is developed of a terbium (III) ion doped selenide chalcogenide glass fibre source that provides spontaneous emission within the mid-infrared (MIR) wavelength range. Three numerical algorithms are used to calculate the solution and compare th... Read More

Numerical simulation of electromagnetic coupling in explicitly meshed wiring looms and bundles (2017)
Journal Article
Meng, X., Sewell, P., Vukovic, A., Zhang, Z., Benson, T. M., Jones, C., …South, G. (2018). Numerical simulation of electromagnetic coupling in explicitly meshed wiring looms and bundles. IET Science, Measurements and Technology, 12(2), doi:10.1049/iet-smt.2017.0359. ISSN 1751-8830

In this paper, the Unstructured Transmission Line Modelling (UTLM) method based on a tetrahedral mesh is applied to model the electromagnetic coupling into wire looms and bundles with multiple cores that are typical of an aircraft system, when they a... Read More

Modelling of multimode selenide-chalcogenide glass fibre based MIR spontaneous emission sources (2017)
Conference Proceeding
Sujecki, S., Sójka, L., Bereś-Pawlik, E., Piramidowicz, R., Sakr, H., Tang, Z., …Seddon, A. B. (2017). Modelling of multimode selenide-chalcogenide glass fibre based MIR spontaneous emission sources. doi:10.1109/ICTON.2017.8024909

Chalcogenide glass fibres have been demonstrated as a suitable medium for the realisation of spontaneous emission sources for mid-infrared photonics applications with a particular emphasis on sensor technology. Such sources give a viable alternative... Read More

Extracting modal field profiles from 3D unstructured transmission line modelling meshes for use as sources and observers (2017)
Journal Article
Sewell, P., Vukovic, A., Benson, T. M., & Meng, X. (2017). Extracting modal field profiles from 3D unstructured transmission line modelling meshes for use as sources and observers. IET Science, Measurements and Technology, 11(6), 780-785. doi:10.1049/iet-smt.2016.0357

Large-scale three-dimensional (3D) electromagnetic simulations are commonly used as design and investigation tools in a wide variety of technological fields. It is not uncommon for both excitations and observation quantities to be expressed in terms... Read More