Skip to main content

Research Repository

Advanced Search

All Outputs (10)

3-dimensional inkjet printing of macro structures from silver nanoparticles (2017)
Journal Article
Vaithilingam, J., Saleh, E., Körner, L., Wildman, R. D., Hague, R. J., Leach, R. K., & Tuck, C. J. (2018). 3-dimensional inkjet printing of macro structures from silver nanoparticles. Materials and Design, 139, https://doi.org/10.1016/j.matdes.2017.10.070

The adoption of additive manufacturing technology is gaining interest for processing precious metals. In this study, the capability of inkjet printing was explored to fabricate macroscopic parts from commercial silver nanoparticle ink (AgNPs). A besp... Read More about 3-dimensional inkjet printing of macro structures from silver nanoparticles.

A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material Jetting (2017)
Journal Article
Aboulkhair, N., He, Y., Zhang, F., Saleh, E., Vaithilingam, J., Aboulkhair, N. T., …Wildman, R. D. (2017). A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material Jetting. Additive Manufacturing, 16, 153-161. https://doi.org/10.1016/j.addma.2017.06.001

© 2017 Support structures and materials are indispensable components in many Additive Manufacturing (AM) systems in order to fabricate complex 3D structures. For inkjet-based AM techniques (known as Material Jetting), there is a paucity of studies o... Read More about A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material Jetting.

A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing (2016)
Journal Article
He, Y., Tuck, C., Prina, E., Kilsby, S., Christie, S. D., Edmondson, S., …Wildman, R. D. (2017). A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105(6), 1645-1657. https://doi.org/10.1002/jbm.b.33699

A new type of photocrosslinkable polycaprolactone (PCL)-based ink that is suitable for three-dimensional (3D) inkjet printing has been developed. Photocrosslinkable PCL dimethylacrylate was synthesized and mixed with poly(ethylene glycol) diacrylate... Read More about A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing.

The effect of laser remelting on the surface chemistry of Ti6al4V components fabricated by selective laser melting (2016)
Journal Article
Vaithilingam, J., Goodridge, R. D., Hague, R. J., Christie, S. D., & Edmondson, S. (2016). The effect of laser remelting on the surface chemistry of Ti6al4V components fabricated by selective laser melting. Journal of Materials Processing Technology, 232, https://doi.org/10.1016/j.jmatprotec.2016.01.022

Surface remelting/skin scanning of components is generally performed during the selective laser melting (SLM) process to improve the surface quality of a part. However, the chemical effects of surface remelting are not well understood. In this study,... Read More about The effect of laser remelting on the surface chemistry of Ti6al4V components fabricated by selective laser melting.

Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing? (2016)
Journal Article
Baumers, M., Tuck, C., Wildman, R. D., Ashcroft, I., & Hague, R. J. (in press). Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing?. Journal of Industrial Ecology, https://doi.org/10.1111/jiec.12397

Additive manufacturing (AM) technology is capable of building up component geometry in a layer-by-layer process, entirely without tools, molds, or dies. One advantage of the approach is that it is capable of efficiently creating complex product geome... Read More about Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing?.

The cost of additive manufacturing: machine productivity, economies of scale and technology-push (2015)
Journal Article
Baumers, M., Dickens, P., Tuck, C., & Hague, R. (2016). The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technological Forecasting and Social Change, 102, https://doi.org/10.1016/j.techfore.2015.02.015

As part of the cosmos of digital fabrication technology, Additive Manufacturing (AM) systems are able to manufacture three-dimensional components and products directly from raw material and 3D design data. The layer-by-layer operating process of thes... Read More about The cost of additive manufacturing: machine productivity, economies of scale and technology-push.

A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V (2015)
Journal Article
Hague, R., Tuck, C., Simonelli, M., Tuck, C., Aboulkhair, N. T., Maskery, I., …Hague, R. J. (2015). A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V. Metallurgical and Materials Transactions A, 46(9), 3842-3851. https://doi.org/10.1007/s11661-015-2882-8

The creation of an object by selective laser melting (SLM) occurs by melting contiguous areas of a powder bed according to a corresponding digital model. It is therefore clear that the success of this metal Additive Manufacturing (AM) technology reli... Read More about A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V.

Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound (2014)
Journal Article
Vaithilingam, J., Kilsby, S., Goodridge, R. D., Christie, S. D., Edmondson, S., & Hague, R. J. (2015). Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound. Materials Science and Engineering: C, 46, 52-61. https://doi.org/10.1016/j.msec.2014.10.015

Surface modification of an implant with a biomolecule is used to improve its biocompatibility and to reduce post-implant complications. In this study, a novel approach has been used to functionalise phosphonic acid monolayers with a drug. Ti6Al4V com... Read More about Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound.

An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties (2014)
Journal Article
Ziegelmeier, S., Christou, P., Wöllecke, F., Tuck, C., Goodridge, R. D., Hague, R. J., …Wintermantel, E. (2015). An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties. Journal of Materials Processing Technology, 215, https://doi.org/10.1016/j.jmatprotec.2014.07.029

The properties of parts manufactured by laser sintering (LS) are, amongst others, influenced by the packing and flow efficiencies of the powders being processed. In particular, this study investigated the influence of the bulk and flow characteris... Read More about An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties.

An error diffusion based method to generate functionally graded cellular structures (2014)
Journal Article
Brackett, D., Ashcroft, I., Wildman, R., & Hague, R. J. (2014). An error diffusion based method to generate functionally graded cellular structures. Computers and Structures, 138, https://doi.org/10.1016/j.compstruc.2014.03.004

The spatial variation of cell size in a functionally graded cellular structure is achieved using error diffusion to convert a continuous tone image into binary form. Effects of two control parameters, greyscale value and resolution on the resulting c... Read More about An error diffusion based method to generate functionally graded cellular structures.