All Outputs (53)

Glycerol-based sustainably sourced resin for volumetric printing (2024)
Journal Article
Krumins, E., Lentz, J. C., Sutcliffe, B., Sohaib, A., Jacob, P. L., Brugnoli, B., …Taresco, V. (2024). Glycerol-based sustainably sourced resin for volumetric printing. Green Chemistry, 26(3), 1345-1355. https://doi.org/10.1039/d3gc03607c

Volumetric Additive Manufacturing (VAM) represents a revolutionary advancement in the field of Additive Manufacturing, as it allows for the creation of objects in a single, cohesive process, rather than in a layer-by-layer approach. This innovative t... Read More about Glycerol-based sustainably sourced resin for volumetric printing.

An in vitro assessment of the thermoreversible PLGA-PEG-PLGA copolymer: Implications for Descemet's membrane endothelial keratoplasty (2022)
Journal Article
Tint, N. L., Cheng, K. K., Dhillon, A. S., Keane, P. A., Alexander, P., Kennedy, D., …Allan, B. D. S. (2023). An in vitro assessment of the thermoreversible PLGA-PEG-PLGA copolymer: Implications for Descemet's membrane endothelial keratoplasty. Clinical and Experimental Ophthalmology, 51(1), 58-66. https://doi.org/10.1111/ceo.14167

Background: To explore the use of a thermoreversible copolymer gel coating to prevent donor tissue scrolling in Descemet's membrane endothelial keratoplasty (DMEK). Methods: PLGA-PEG-PLGA triblock copolymer was synthesised via ring opening polymerisa... Read More about An in vitro assessment of the thermoreversible PLGA-PEG-PLGA copolymer: Implications for Descemet's membrane endothelial keratoplasty.

Lysyl oxidase like 2 is increased in asthma and contributes to asthmatic airway remodelling (2022)
Journal Article
Ramis, J., Middlewick, R., Pappalardo, F., Cairns, J. T., Stewart, I. D., John, A. E., …Tatler, A. L. (2022). Lysyl oxidase like 2 is increased in asthma and contributes to asthmatic airway remodelling. European Respiratory Journal, 60(1), Article 2004361. https://doi.org/10.1183/13993003.04361-2020

BACKGROUND: Airway smooth muscle (ASM) cells are fundamental to asthma pathogenesis, influencing bronchoconstriction, airway hyperresponsiveness and airway remodelling. The extracellular matrix (ECM) can influence tissue remodelling pathways; however... Read More about Lysyl oxidase like 2 is increased in asthma and contributes to asthmatic airway remodelling.

Mineralizing Coating on 3D Printed Scaffolds for the Promotion of Osseointegration (2022)
Journal Article
Hasan, A., Bagnol, R., Owen, R., Latif, A., Rostam, H. M., Elsharkawy, S., …Mata, A. (2022). Mineralizing Coating on 3D Printed Scaffolds for the Promotion of Osseointegration. Frontiers in Bioengineering and Biotechnology, 10, Article 836386. https://doi.org/10.3389/fbioe.2022.836386

Design and fabrication of implants that can perform better than autologous bone grafts remain an unmet challenge for the hard tissue regeneration in craniomaxillofacial applications. Here, we report an integrated approach combining additive manufactu... Read More about Mineralizing Coating on 3D Printed Scaffolds for the Promotion of Osseointegration.

Correction to “Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers” (2022)
Journal Article
Ruiz-Cantu, L., Trindade, G. F., Taresco, V., Zhou, Z., He, Y., Burroughs, L., …Wildman, R. D. (2022). Correction to “Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers”. ACS Applied Materials and Interfaces, 14(6), 8654. https://doi.org/10.1021/acsami.2c00035

The chemical structure of the drug trandolapril has been corrected in Figure 4c. The conclusions of the work have not been affected by this correction. (Figure present).

Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices (2021)
Journal Article
He, Y., Luckett, J., Begines, B., Dubern, J. F., Hook, A. L., Prina, E., …Wildman, R. D. (2022). Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices. Biomaterials, 281, Article 121350. https://doi.org/10.1016/j.biomaterials.2021.121350

Chronic infection as a result of bacterial biofilm formation on implanted medical devices is a major global healthcare problem requiring new biocompatible, biofilm-resistant materials. Here we demonstrate how bespoke devices can be manufactured throu... Read More about Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices.

Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers (2021)
Journal Article
Ruiz-Cantu, L., Trindade, G. F., Taresco, V., Zhou, Z., He, Y., Burroughs, L., …Wildman, R. D. (2021). Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers. ACS Applied Materials and Interfaces, 13(33), 38969-38978. https://doi.org/10.1021/acsami.1c07850

Controlling the microstructure of materials by means of phase separation is a versatile tool for optimizing material properties. Phase separation has been exploited to fabricate intricate microstructures in many fields including cell biology, tissue... Read More about Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers.

Droplet Microfluidic Optimisation Using Micropipette Characterisation of Bio-Instructive Polymeric Surfactants (2021)
Journal Article
Henshaw, C. A., Dundas, A. A., Cuzzucoli Crucitti, V., Alexander, M. R., Wildman, R., Rose, F. R. A. J., …Williams, P. M. (2021). Droplet Microfluidic Optimisation Using Micropipette Characterisation of Bio-Instructive Polymeric Surfactants. Molecules, 26(11), Article 3302. https://doi.org/10.3390/molecules26113302

Droplet microfluidics can produce highly tailored microparticles whilst retaining monodispersity. However, these systems often require lengthy optimisation, commonly based on a trial-and-error approach, particularly when using bio-instructive, polyme... Read More about Droplet Microfluidic Optimisation Using Micropipette Characterisation of Bio-Instructive Polymeric Surfactants.

Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices (2021)
Journal Article
He, Y., Abdi, M., Trindade, G. F., Begines, B., Dubern, J. F., Prina, E., …Wildman, R. D. (2021). Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices. Advanced Science, 8(15), Article 2100249. https://doi.org/10.1002/advs.202100249

As the understanding of disease grows, so does the opportunity for personalization of therapies targeted to the needs of the individual. To bring about a step change in the personalization of medical devices it is shown that multi-material inkjet-bas... Read More about Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices.

Mixed polymer and bioconjugate core/shell electrospun fibres for biphasic protein release (2021)
Journal Article
Adala, I., Ramis, J., Ntone Moussinga, C., Janowski, I., Amer, M. H., Bennett, A. J., …Rose, F. R. (2021). Mixed polymer and bioconjugate core/shell electrospun fibres for biphasic protein release. Journal of Materials Chemistry B, 9(20), 4120-4133. https://doi.org/10.1039/d1tb00129a

Effective regenerative medicine requires delivery systems which can release multiple components at appropriate levels and at different phases of tissue growth and repair. However, there are few biomaterials and encapsulation techniques that are fully... Read More about Mixed polymer and bioconjugate core/shell electrospun fibres for biphasic protein release.

Discovery of synergistic material-topography combinations to achieve immunomodulatory osteoinductive biomaterials using a novel in vitro screening method: The ChemoTopoChip (2021)
Journal Article
Burroughs, L., Amer, M., Vassey, M., Koch, B., Figueredo, G., Mukonoweshuro, B., …Alexander, M. R. (2021). Discovery of synergistic material-topography combinations to achieve immunomodulatory osteoinductive biomaterials using a novel in vitro screening method: The ChemoTopoChip. Biomaterials, 271, Article 120740. https://doi.org/10.1016/j.biomaterials.2021.120740

© 2021 The Authors Human mesenchymal stem cells (hMSCs) are widely represented in regenerative medicine clinical strategies due to their compatibility with autologous implantation. Effective bone regeneration involves crosstalk between macrophages an... Read More about Discovery of synergistic material-topography combinations to achieve immunomodulatory osteoinductive biomaterials using a novel in vitro screening method: The ChemoTopoChip.

Designing topographically textured microparticles for induction and modulation of osteogenesis in mesenchymal stem cell engineering (2020)
Journal Article
Amer, M. H., Alvarez-Paino, M., McLaren, J., Pappalardo, F., Trujillo, S., Wong, J. Q., …Rose, F. R. (2021). Designing topographically textured microparticles for induction and modulation of osteogenesis in mesenchymal stem cell engineering. Biomaterials, 266, Article 120450. https://doi.org/10.1016/j.biomaterials.2020.120450

© 2020 The Authors Mesenchymal stem cells are the focus of intense research in bone development and regeneration. The potential of microparticles as modulating moieties of osteogenic response by utilizing their architectural features is demonstrated... Read More about Designing topographically textured microparticles for induction and modulation of osteogenesis in mesenchymal stem cell engineering.

Bioinspired Precision Engineering of Three-Dimensional Epithelial Stem Cell Microniches (2020)
Journal Article
Prina, E., Amer, M. H., Sidney, L., Tromayer, M., Moore, J., Liska, R., …Rose, F. R. (2020). Bioinspired Precision Engineering of Three-Dimensional Epithelial Stem Cell Microniches. Advanced Biosystems, 4(6), Article 2000016. https://doi.org/10.1002/adbi.202000016

© 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Maintenance of the epithelium relies on stem cells residing within specialized microenvironments, known as epithelial crypts. Two-photon polymerization (2PP) is a valuable... Read More about Bioinspired Precision Engineering of Three-Dimensional Epithelial Stem Cell Microniches.

The electrospinning of a thermo-responsive polymer with peptide conjugates for phenotype support and extracellular matrix production of therapeutically relevant mammalian cells (2020)
Journal Article
Ruiter, F. A., Sidney, L. E., Kiick, K. L., Segal, J. I., Alexander, C., & Rose, F. R. A. J. (2020). The electrospinning of a thermo-responsive polymer with peptide conjugates for phenotype support and extracellular matrix production of therapeutically relevant mammalian cells. Biomaterials Science, 8(9), 2611-2626. https://doi.org/10.1039/c9bm01965k

Current cell expansion methods for tissue engineering and regenerative medicine applications rely on the use of enzymatic digestion passaging and 2D platforms. However, this enzymatic treatment significantly reduces cell quality, due to the destructi... Read More about The electrospinning of a thermo-responsive polymer with peptide conjugates for phenotype support and extracellular matrix production of therapeutically relevant mammalian cells.

A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants (2020)
Journal Article
He, Y., Foralosso, R., Ferraz Trindade, G., Ilchev, A., Cantu, L. R., Clark, E., …Wildman, R. D. (2020). A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants. Advanced Therapeutics, 3(6), Article 1900187. https://doi.org/10.1002/adtp.201900187

We propose a strategy for creating tuneable 3D printed drug delivery devices. 3D printing offers the opportunity for improved compliance and patient treatment outcomes through personalisation, but bottlenecks include finding formulations that provide... Read More about A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants.

Development of bioactive electrospun scaffolds suitable to support skin fibroblasts and release Lucilia sericata maggot excretion/secretion (2019)
Working Paper
Giacaman, A. G., Styliari, I. D., Taresco, V., Pritchard, D., Alexander, C., & Rose, F. R. Development of bioactive electrospun scaffolds suitable to support skin fibroblasts and release Lucilia sericata maggot excretion/secretion

Larval therapy has been reported to exert beneficial actions upon chronic wound healing by promoting granulation tissue formation, antimicrobial activity and degrading necrotic tissue. However, the use of live maggots is problematic for patient accep... Read More about Development of bioactive electrospun scaffolds suitable to support skin fibroblasts and release Lucilia sericata maggot excretion/secretion.

Stem cells from the dental apical papilla in extracellular matrix hydrogels mitigate inflammation of microglial cells (2019)
Journal Article
Tatic, N., Rose, F. R., des Rieux, A., & White, L. J. (2019). Stem cells from the dental apical papilla in extracellular matrix hydrogels mitigate inflammation of microglial cells. Scientific Reports, 9, https://doi.org/10.1038/s41598-019-50367-x

After spinal cord injury (SCI) chronic inflammation hampers regeneration. Influencing the local microenvironment after SCI may provide a strategy to modulate inflammation and the immune response. The objectives of this work were to determine whether... Read More about Stem cells from the dental apical papilla in extracellular matrix hydrogels mitigate inflammation of microglial cells.

Polymer microparticles with defined surface chemistry and topography mediate the formation of stem cell aggregates and cardiomyocyte function (2019)
Journal Article
Alvarez-Paino, M., Amer, M. H., Nasir, A., Cuzzucoli Crucitti, V., Thorpe, J., Burroughs, L., …Rose, F. (2019). Polymer microparticles with defined surface chemistry and topography mediate the formation of stem cell aggregates and cardiomyocyte function. ACS Applied Materials and Interfaces, 11(38), 34560-34574. https://doi.org/10.1021/acsami.9b04769

Surface-functionalized microparticles are relevant to fields spanning engineering and biomedicine, with uses ranging from cell culture to advanced cell delivery. Varying topographies of biomaterial surfaces are also being investigated as mediators of... Read More about Polymer microparticles with defined surface chemistry and topography mediate the formation of stem cell aggregates and cardiomyocyte function.

Nanofibrous scaffolds support a 3D in vitro permeability model of the human intestinal epitheleum (2019)
Journal Article
Patient, J. D., Hajiali, H., Harris, K., Abrahamsson, B., Tannergreen, C., White, L. J., …Rose, F. R. (2019). Nanofibrous scaffolds support a 3D in vitro permeability model of the human intestinal epitheleum. Frontiers in Pharmacology, 10, Article 456. https://doi.org/10.3389/fphar.2019.00456

Advances in drug research not only depend on high throughput screening to evaluate large numbers of lead compounds but also on the development of in vitro models which can simulate human tissues in terms of drug permeability and functions. Potential... Read More about Nanofibrous scaffolds support a 3D in vitro permeability model of the human intestinal epitheleum.

Spatially-offset Raman spectroscopy for monitoring mineralization of bone tissue engineering scaffolds: feasibility study based on phantom samples (2019)
Journal Article
Dooley, M., Prasopthum, A., Liao, Z., Sinjab, F., Mclaren, J., Rose, F. R. A. J., …Notingher, I. (2019). Spatially-offset Raman spectroscopy for monitoring mineralization of bone tissue engineering scaffolds: feasibility study based on phantom samples. Biomedical Optics Express, 10(4), 1678-1690. https://doi.org/10.1364/BOE.10.001678

Using phantom samples, we investigated the feasibility of spatially-offset Raman spectroscopy (SORS) as a tool for monitoring non-invasively the mineralization of bone tissue engineering scaffold in-vivo. The phantom samples consisted of 3D-printed s... Read More about Spatially-offset Raman spectroscopy for monitoring mineralization of bone tissue engineering scaffolds: feasibility study based on phantom samples.