Skip to main content

Research Repository

Advanced Search

All Outputs (42)

Statistical point cloud model to investigate measurement uncertainty in coordinate metrology (2021)
Journal Article
Senin, N., Catalucci, S., Moretti, M., & Leach, R. (2021). Statistical point cloud model to investigate measurement uncertainty in coordinate metrology. Precision Engineering, 70, 44-62. https://doi.org/10.1016/j.precisioneng.2021.01.008

In this work an approach to investigate measurement uncertainty in coordinate metrology is presented, based on fitting Gaussian random fields to high-density point clouds produced by measurement repeats. The fitted field delivers a depiction of the s... Read More about Statistical point cloud model to investigate measurement uncertainty in coordinate metrology.

Multi-view fringe projection system for surface topography measurement during metal powder bed fusion (2020)
Journal Article
Dickins, A., Widjanarko, T., Sims-Waterhouse, D., Thompson, A., Lawes, S., Senin, N., & Leach, R. (2020). Multi-view fringe projection system for surface topography measurement during metal powder bed fusion. Journal of the Optical Society of America A, 37(9), B93-B105. https://doi.org/10.1364/JOSAA.396186

Metal powder bed fusion (PBF) methods need in-process measurement methods to increase user confidence and encourage further adoption in high-value manufacturing sectors. In this paper, a novel measurement method for PBF systems is proposed that uses... Read More about Multi-view fringe projection system for surface topography measurement during metal powder bed fusion.

Comparison and validation of surface topography segmentation methods for feature-based characterisation of metal powder bed fusion surfaces (2019)
Journal Article
Newton, L., Senin, N., Smith, B., Chatzivagiannis, E., & Leach, R. (2019). Comparison and validation of surface topography segmentation methods for feature-based characterisation of metal powder bed fusion surfaces. Surface Topography: Metrology and Properties, 7(4), https://doi.org/10.1088/2051-672X/ab520a

Feature-based characterisation, i.e. the characterisation of surface topography based on the isolation of relevant topographic formations (features) and their dimensional assessment, is a developing field of surface texture metrology. Feature-based a... Read More about Comparison and validation of surface topography segmentation methods for feature-based characterisation of metal powder bed fusion surfaces.

Increasing throughput in x-ray computed tomography measurement of surface topography using sinogram interpolation (2019)
Journal Article
Körner, L., Lawes, S., Bate, D., Newton, L., Senin, N., & Leach, R. K. (2019). Increasing throughput in x-ray computed tomography measurement of surface topography using sinogram interpolation. Measurement Science and Technology, 30(12), Article 125002. https://doi.org/10.1088/1361-6501/ab37e5

© 2019 Crown copyright. Reproduced with the permission of the Controller of Her Majesty's Stationery Office. X-ray computed tomography (XCT) is a non-destructive imaging technique that has recently gained interest as a tool to measure surface topogra... Read More about Increasing throughput in x-ray computed tomography measurement of surface topography using sinogram interpolation.

Automated assessment of object coverage in smart, optical form measurement (2019)
Conference Proceeding
Catalucci, S., Senin, N., Stavroulakis, P., & Leach, R. (2019). Automated assessment of object coverage in smart, optical form measurement. In Proceedings of 19th International euspen Conference & Exhibition

As part of a project to develop a smart 3D form measurement system for quality control of complex 3D parts, we present early work in algorithmic assessment of coverage achieved on the surfaces of a part subjected to optical measurement from a single... Read More about Automated assessment of object coverage in smart, optical form measurement.

Optical measurement of surface topographies with transparent coatings (2019)
Journal Article
Feng, X., Senin, N., Su, R., Ramasamy, S., & Leach, R. (2019). Optical measurement of surface topographies with transparent coatings. Optics and Lasers in Engineering, 121, 261-270. https://doi.org/10.1016/j.optlaseng.2019.04.018

Manufacturers nowadays have access to state-of-the-art areal surface topography measurement instruments that allow investigation of surface topography at unprecedented levels of detail and over a wide range of scales. However, high value-added produc... Read More about Optical measurement of surface topographies with transparent coatings.

Assessment of surface topography modifications through feature-based registration of areal topography data (2019)
Journal Article
Moretti, M., Gambucci, G., Leach, R., & Senin, N. (2019). Assessment of surface topography modifications through feature-based registration of areal topography data. Surface Topography: Metrology and Properties, 7(2), https://doi.org/10.1088/2051-672X/ab152a

Surface topography modifications due to wear or other factors are usually investigated by visual and microscopic inspection, and – when quantitative assessment is required – through the computation of surface texture parameters. However, the current... Read More about Assessment of surface topography modifications through feature-based registration of areal topography data.

Areal topography measurement of metal additive surfaces using focus variation microscopy (2018)
Journal Article
Newton, L., Senin, N., Gomez, C., Danzl, R., Helmli, F., Blunt, L., & Leach, R. (2019). Areal topography measurement of metal additive surfaces using focus variation microscopy. Additive Manufacturing, 25, 365-389. https://doi.org/10.1016/j.addma.2018.11.013

In this work, the performance of a focus variation instrument for measurement of areal topography of metal additive surfaces was investigated. Samples were produced using both laser and electron beam powder bed fusion processes with some of the most... Read More about Areal topography measurement of metal additive surfaces using focus variation microscopy.

Verification of a rigorous 2D model of rough surface scattering (2018)
Conference Proceeding
Thomas, M., Leach, R., Nikolaev, N., Widjanarko, T., Senin, N., Aryan, H., & Coupland, J. (2018). Verification of a rigorous 2D model of rough surface scattering.

A rigorous two-dimensional (2D) model of electromagnetic surface scatter has been developed, based on a boundary element method (BEM) established by Simonsen [1]. Simulated far-field scatter is compared to that measured from a laser scatterometer for... Read More about Verification of a rigorous 2D model of rough surface scattering.

Information-rich surface metrology (2018)
Journal Article
Senin, N., & Leach, R. K. (2018). Information-rich surface metrology. Procedia CIRP, 75, 19-26. https://doi.org/10.1016/j.procir.2018.05.003

Information-rich metrology refers to the incorporation of any type of available information in the data acquisition and processing pipeline of a measurement process, in order to improve the efficiency and quality of the measurement. In this work, the... Read More about Information-rich surface metrology.

An interlaboratory comparison of X-ray computed tomography measurement for texture and dimensional characterisation of additively manufactured parts (2018)
Journal Article
Townsend, A., Racasan, R., Leach, R., Senin, N., Thompson, A., Ramsey, A., …Blunt, L. (2018). An interlaboratory comparison of X-ray computed tomography measurement for texture and dimensional characterisation of additively manufactured parts. Additive Manufacturing, 23, 422-432. https://doi.org/10.1016/j.addma.2018.08.013

This paper presents the results of the CT-STARR (CT-Surface Texture for Additive Round Robin) Stage 1 interlaboratory comparison. The study compared the results obtained for the extraction of areal surface texture data per ISO 25178-2 from five X-ray... Read More about An interlaboratory comparison of X-ray computed tomography measurement for texture and dimensional characterisation of additively manufactured parts.

Curvature-based segmentation of powder bed point clouds for in-process monitoring (2018)
Conference Proceeding
Chung Chee Law, A., Southon, N., Senin, N., Stavroulakis, P., Leach, R., Goodridge, R., & Kong, Z. (2018). Curvature-based segmentation of powder bed point clouds for in-process monitoring. In 29th Annual International Solid Freeform Fabrication Symposium - an Additive Manufacturing Conference 2018

This paper presents a curvature-based analysis of point clouds collected in-process with fringe projection in a polymer powder bed fusion process. The three-dimensional point clouds were obtained from outside of the build chamber with a fringe projec... Read More about Curvature-based segmentation of powder bed point clouds for in-process monitoring.

A programmable software framework for the generation of simulated surface topography (2018)
Conference Proceeding
Todhunter, L. D., Senin, N., Leach, R., Lawes, S., Blateyron, F., & Harris, P. (2018). A programmable software framework for the generation of simulated surface topography.

A flexible and programmable software framework has been developed that enables the creation of simulated, areal surface topography datasets. The framework allows the creation of surfaces through a layered approach where deterministic topographic stru... Read More about A programmable software framework for the generation of simulated surface topography.

Development of an X-ray simulator: from STTL file to grey scale image (2018)
Conference Proceeding
Korner, L., Leach, R., & Lawes, S. (2018). Development of an X-ray simulator: from STTL file to grey scale image. In Proceedings of the 18th International conference of the European Society for Precision Engineering and Nanotechnology (euspen), 503-504

Feature-based characterisation of evolving surface topographies in finishing operations for additive manufacturing (2018)
Presentation / Conference
Newton, L., Senin, N., Smith, B., & Leach, R. (2018, June). Feature-based characterisation of evolving surface topographies in finishing operations for additive manufacturing. Paper presented at 18th International Conference and Exhibition (euspan)

Finishing operations play a fundamental role in the additive manufacture of components. Conventional surface metrology solutions allow for the characterisation of surface roughness through texture parameters, but are not fully suitable to capture the... Read More about Feature-based characterisation of evolving surface topographies in finishing operations for additive manufacturing.