Skip to main content

Research Repository

Advanced Search

All Outputs (53)

Fillet Radius Impact of Rectangular Insulated Wires on PDIV for Turn-to-Turn Insulation of Inverter-Fed Motors (2024)
Journal Article
Naderiallaf, H., Degano, M., Gerada, C., & Gerada, D. (2024). Fillet Radius Impact of Rectangular Insulated Wires on PDIV for Turn-to-Turn Insulation of Inverter-Fed Motors. IEEE Transactions on Dielectrics and Electrical Insulation, 1-1. https://doi.org/10.1109/tdei.2024.3355032

This contribution elucidates the impact of the fillet radius, a geometric feature of rectangular insulated wires not commonly considered, on the partial discharge inception voltage (PDIV) in low-voltage machine turn-to-turn winding insulation. Initia... Read More about Fillet Radius Impact of Rectangular Insulated Wires on PDIV for Turn-to-Turn Insulation of Inverter-Fed Motors.

Assessment of Edgewise Insulated Wire Bend Radius Impact on Dielectric Properties of Turn-to-Turn Insulation through Thermal Ageing (2023)
Journal Article
Naderiallaf, H., Degano, M., & Gerada, C. (2023). Assessment of Edgewise Insulated Wire Bend Radius Impact on Dielectric Properties of Turn-to-Turn Insulation through Thermal Ageing. IEEE Transactions on Dielectrics and Electrical Insulation, https://doi.org/10.1109/TDEI.2023.3309780

This study aims to evaluate the impact of the bending radius of edgewise insulated wires on dielectric properties such as partial discharge inception voltage (PDIV), partial discharge extinction voltage (PDEV), dielectric dissipation factor (DDF), an... Read More about Assessment of Edgewise Insulated Wire Bend Radius Impact on Dielectric Properties of Turn-to-Turn Insulation through Thermal Ageing.

PDIV Modelling for Rectangular Wire Turn-to-Turn Insulation of Inverter-Fed Motors through Thermal Ageing (2023)
Journal Article
Naderiallaf, H., Degano, M., & Gerada, C. (2023). PDIV Modelling for Rectangular Wire Turn-to-Turn Insulation of Inverter-Fed Motors through Thermal Ageing. IEEE Transactions on Dielectrics and Electrical Insulation, 1-10. https://doi.org/10.1109/tdei.2023.3307048

This contribution develops the partial discharge inception voltage (PDIV)-FEM-based model based on Schumann’s streamer inception criterion (SCSIC) with respect to thermal ageing time (TAGT) or the insulation lifetime for the turn-to-turn insulation o... Read More about PDIV Modelling for Rectangular Wire Turn-to-Turn Insulation of Inverter-Fed Motors through Thermal Ageing.

Amorphous-crystalline nanostructured Nd-Fe-B permanent magnets using laser powder bed fusion: Metallurgy and magnetic properties (2023)
Journal Article
Wu, J., Aboulkhair, N. T., Robertson, S., Zhou, Z., Bagot, P. A., Moody, M. P., …Hague, R. J. (2023). Amorphous-crystalline nanostructured Nd-Fe-B permanent magnets using laser powder bed fusion: Metallurgy and magnetic properties. Acta Materialia, 259, 119239. https://doi.org/10.1016/j.actamat.2023.119239

Laser powder-bed fusion (PBF-LB), a class of additive manufacturing (AM), has attracted wide interest in the production of Nd-Fe-B permanent magnets, benefiting from the minimisation of waste of rare-earth elements and the post-processing requirement... Read More about Amorphous-crystalline nanostructured Nd-Fe-B permanent magnets using laser powder bed fusion: Metallurgy and magnetic properties.

Fast Assessment of Rotor Barrier Dimensional Allowances in Synchronous Reluctance Machines (2023)
Journal Article
Madariaga, C., Gallardo, C., Tapia, J. A., Jara, W., Escobar, A., & Degano, M. (2023). Fast Assessment of Rotor Barrier Dimensional Allowances in Synchronous Reluctance Machines. IEEE Access, 11, 58349-58358. https://doi.org/10.1109/access.2023.3284753

Tolerance analysis on synchronous reluctance machines (SynRM) is mandatory if accurate refinements of the rotor structure are adopted, a must for low-ripple applications However, the impact of manufacturing/dimensional tolerances or material degradat... Read More about Fast Assessment of Rotor Barrier Dimensional Allowances in Synchronous Reluctance Machines.

Design of an aircraft generator with radial force control. (2023)
Journal Article
Brecher, C., Neus, S., Gärtner, M., Eckel, H., Hoppert, M., James, B., …Di Nardo, M. (2023). Design of an aircraft generator with radial force control. Open Research Europe, 2, Article 73. https://doi.org/10.12688/openreseurope.14684.3

With the increasing electrical energy demands in aviation propulsion systems, the increase in the onboard generators’ power density is inevitable. During the flight, forces coming from the gearbox or gyroscopic forces generated by flight manoeuvres l... Read More about Design of an aircraft generator with radial force control..

Radical technology innovations for high‐speed transport; ePlanes to replace rail? (2023)
Journal Article
Riley, P. H., Degano, M., & Gerada, C. (2023). Radical technology innovations for high‐speed transport; ePlanes to replace rail?. IET Electrical Systems in Transportation, 13(1), Article 12061. https://doi.org/10.1049/els2.12061

This paper evaluates various modes of transport against the dual requirements of Net-Zero carbon emissions and user convenience, in particular, speed of travel and cost of transportation. Results show that when operated across a whole country, batter... Read More about Radical technology innovations for high‐speed transport; ePlanes to replace rail?.

Surface Permanent Magnet Synchronous Machines: High Speed Design and Limits (2022)
Journal Article
Gallicchio, G., Nardo, M. D., Palmieri, M., Ilkhani, M. R., Degano, M., Gerada, C., & Cupertino, F. (2023). Surface Permanent Magnet Synchronous Machines: High Speed Design and Limits. IEEE Transactions on Energy Conversion, 38(2), 1311-1324. https://doi.org/10.1109/tec.2022.3225224

Surface permanent magnet synchronous machines are one of the most widely adopted machine topologies in high-speed applications where efficiency and power factor cannot be compromised. Although the design of such machine type has been extensively inve... Read More about Surface Permanent Magnet Synchronous Machines: High Speed Design and Limits.

2-DOF Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios (2022)
Journal Article
Wang, M., Buticchi, G., Li, J., Gu, C., Gerada, D., Degano, M., …Gerada, C. (2023). 2-DOF Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios. IEEE Transactions on Transportation Electrification, 9(2), 2048-2058. https://doi.org/10.1109/TTE.2022.3210909

In high performance drive systems, wide bandwidth and reference tracking accuracy of current control loop are fundamental requirements. The conventional PI controller provides robustness against the machine parameter mismatching and zero steady-state... Read More about 2-DOF Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios.

Comparison of AC Losses in the Winding of Electrical Machines with Fixed Strands Positions, Fixed Conductor Shapes and Random Winding (2022)
Journal Article
Bardalai, A., Gerada, D., Zou, T., Degano, M., Zhang, C., & Gerada, C. (2022). Comparison of AC Losses in the Winding of Electrical Machines with Fixed Strands Positions, Fixed Conductor Shapes and Random Winding. Energies, 15(15), Article 5701. https://doi.org/10.3390/en15155701

In high performance electric machines, the increase of fundamental frequency leads to additional losses in the winding due to parasitic effects such as the associated skin and proximity effects. In the first part, this paper presents an investigation... Read More about Comparison of AC Losses in the Winding of Electrical Machines with Fixed Strands Positions, Fixed Conductor Shapes and Random Winding.

Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios (2022)
Journal Article
Wang, M., Buticchi, G., Li, J., Gu, C., Gerada, D., Degano, M., …Geradab, C. (2022). Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios. IEEE Journal of Emerging and Selected Topics in Power Electronics, https://doi.org/10.1109/jestpe.2022.3179184

Implementation of proportional-integral (PI) controllers in synchronous reference frame (SRF) is a well-established current control solution for electric drives. It is a general and effective method in digital control as long as the ratio of Sampling... Read More about Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios.

High Speed Permanent Magnet Assisted Synchronous Reluctance Machines - Part I: A General Design Approach (2022)
Journal Article
Gallicchio, G., Di Nardo, M., Palmieri, M., Marfoli, A., Degano, M., Gerada, C., & Cupertino, F. (2022). High Speed Permanent Magnet Assisted Synchronous Reluctance Machines - Part I: A General Design Approach. IEEE Transactions on Energy Conversion, 1-1. https://doi.org/10.1109/tec.2022.3176382

The design of synchronous reluctance machines with and without permanent magnets assistance constitutes a challenging engineering task due to the numerous design variables and performance indexes to be considered. The design complexity increases even... Read More about High Speed Permanent Magnet Assisted Synchronous Reluctance Machines - Part I: A General Design Approach.

High Speed Permanent Magnet Assisted Synchronous Reluctance Machine - Part II: Performance Boundaries (2022)
Journal Article
Di Nardo, M., Gallicchio, G., Palmieri, M., Marfoli, A., Degano, M., Gerada, C., & Cupertino, F. (2022). High Speed Permanent Magnet Assisted Synchronous Reluctance Machine - Part II: Performance Boundaries. IEEE Transactions on Energy Conversion, 37(4), 2567-2577. https://doi.org/10.1109/tec.2022.3176383

The insertion of permanent magnets (PMs) within the rotor slots of Synchronous Reluctance Machines (SyRM) is the most common design strategy used to increase significantly their performance. In this paper it is shown how a permanent magnet assisted s... Read More about High Speed Permanent Magnet Assisted Synchronous Reluctance Machine - Part II: Performance Boundaries.

Synchronous Reluctance Machines: A Comprehensive Review and Technology Comparison (2022)
Journal Article
Murataliyev, M., Degano, M., Nardo, M. D., Bianchi, N., & Gerada, C. (2022). Synchronous Reluctance Machines: A Comprehensive Review and Technology Comparison. Proceedings of the IEEE, 110(3), 382-399. https://doi.org/10.1109/jproc.2022.3145662

In the last decade, the trend toward higher efficiency and higher torque density electrical machines (EMs) without permanent magnets (PMs) for the industrial sector has rapidly increased. This work discusses the latest research and industrial advance... Read More about Synchronous Reluctance Machines: A Comprehensive Review and Technology Comparison.

Rotor Slot Design of Squirrel Cage Induction Motors with Improved Rated Efficiency and Starting Capability (2022)
Journal Article
Di Nardo, M., Marfoli, A., Degano, M., & Gerada, C. (2022). Rotor Slot Design of Squirrel Cage Induction Motors with Improved Rated Efficiency and Starting Capability. IEEE Transactions on Industry Applications, 58(3), 3383-3393. https://doi.org/10.1109/TIA.2022.3147156

Among the electro-mechanical devices transforming energy from electrical to mechanical, the squirrel cage induction motor can be surely considered a workhorse of the industry due to its robustness, low cost and good performance when directly fed by t... Read More about Rotor Slot Design of Squirrel Cage Induction Motors with Improved Rated Efficiency and Starting Capability.

High-Speed Synchronous Reluctance Machines: Materials Selection and Performance Boundaries (2021)
Journal Article
Di Nardo, M., Gallicchio, G., Palmieri, M., Marfoli, A., Lo Calzo, G., Degano, M., …Cupertino, F. (2022). High-Speed Synchronous Reluctance Machines: Materials Selection and Performance Boundaries. IEEE Transactions on Transportation Electrification, 8(1), 1228-1241. https://doi.org/10.1109/TTE.2021.3109452

This article presents a comprehensive comparative design exercise of synchronous reluctance (SyR) machines considering different soft magnetic materials and a wide range of speeds. First, a general design methodology able to consider all the conseque... Read More about High-Speed Synchronous Reluctance Machines: Materials Selection and Performance Boundaries.

Improved Thermal Modeling and Experimental Validation of Oil-Flooded High-Performance Machines with Slot-Channel Cooling (2021)
Journal Article
Zhang, F., Gerada, D., Xu, Z., Zhang, X., Zhang, H., Gerada, C., …Degano, M. (2022). Improved Thermal Modeling and Experimental Validation of Oil-Flooded High-Performance Machines with Slot-Channel Cooling. IEEE Transactions on Transportation Electrification, 8(1), 312-324. https://doi.org/10.1109/TTE.2021.3106819

Thermal management is often considered a bottleneck in the pursuit of the next-generation electrical machines for electrified transportation with a step change in power density. Slot-channel cooling is considered to be an effective cooling technique,... Read More about Improved Thermal Modeling and Experimental Validation of Oil-Flooded High-Performance Machines with Slot-Channel Cooling.

A Novel Flux Barrier Parametrization for Synchronous Reluctance Machines (2021)
Journal Article
Korman, O., Di Nardo, M., Degano, M., & Gerada, C. (2021). A Novel Flux Barrier Parametrization for Synchronous Reluctance Machines. IEEE Transactions on Energy Conversion, 37(1), 675-684. https://doi.org/10.1109/TEC.2021.3099628

This paper presents a novel parametrization for the flux barrier profiles of synchronous reluctance and permanent magnet assisted reluctance machines. In literature there are several methods used to design rotor flux barriers of various types, howeve... Read More about A Novel Flux Barrier Parametrization for Synchronous Reluctance Machines.

Modular Power Sharing Control for Bearingless Multi-Three Phase Permanent Magnet Synchronous Machine (2021)
Journal Article
Wen, Z., Di Nardo, M., Sala, G., Valente, G., Marfoli, A., Degano, M., …Gerada, C. (2022). Modular Power Sharing Control for Bearingless Multi-Three Phase Permanent Magnet Synchronous Machine. IEEE Transactions on Industrial Electronics, 69(7), 6600-6610. https://doi.org/10.1109/TIE.2021.3097610

This paper proposes a modular approach to the power sharing control of permanent magnet synchronous bearingless machine. The selected machine topology features a winding layout with phases distributed into non-overlapping three phase groups, a soluti... Read More about Modular Power Sharing Control for Bearingless Multi-Three Phase Permanent Magnet Synchronous Machine.

Process-structure-property relationships in laser powder bed fusion of permanent magnetic Nd-Fe-B (2021)
Journal Article
Wu, J., Aboulkhair, N. T., Degano, M., Ashcroft, I., & Hague, R. J. (2021). Process-structure-property relationships in laser powder bed fusion of permanent magnetic Nd-Fe-B. Materials and Design, 209, Article 109992. https://doi.org/10.1016/j.matdes.2021.109992

Laser powder-bed fusion (L-PBF), as an additive manufacturing (AM) technique, has demonstrated excellent capabilities in achieving degrees of freedom in manufacturing that are otherwise unattainable. The potential of combining Nd-Fe-B as a permanent... Read More about Process-structure-property relationships in laser powder bed fusion of permanent magnetic Nd-Fe-B.