Skip to main content

Research Repository

Advanced Search

All Outputs (31)

Rotor Vibration Control using Multi-Three-Phase Permanent Magnet Synchronous Machines (2023)
Conference Proceeding
Di Nardo, M., Ilkhani, M. R., Wang, M., Degano, M., Gerada, C., Sala, G., …Hoppert, M. (2023). Rotor Vibration Control using Multi-Three-Phase Permanent Magnet Synchronous Machines. In 2023 IEEE International Electric Machines & Drives Conference (IEMDC). https://doi.org/10.1109/IEMDC55163.2023.10238954

This paper investigates the possibility to control the radial displacements of the shaft of an electrical machine equipped with a multi-three-phase winding arrangement with the aim of reducing the related vibrations. A comprehensive dynamic modeling... Read More about Rotor Vibration Control using Multi-Three-Phase Permanent Magnet Synchronous Machines.

Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications (2022)
Conference Proceeding
Tameemi, A., Degano, M., Di Nardo, M., Murataliyev, M., Gerada, D., Xu, Z., & Gerada, C. (2022). Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications. In 2022 International Conference on Electrical Machines (ICEM) (807-813). https://doi.org/10.1109/icem51905.2022.9910911

Permanent magnet synchronous motors are very suitable in applications demanding high power density with high performance requirements, such as in aerospace actuators. Achieving high performance targets while keeping the total weight of the electrical... Read More about Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications.

Influence of the Magnetic Load on High Speed Synchronous Reluctance Machines Design (2021)
Conference Proceeding
Gallicchio, G., Palmieri, M., Cupertino, F., Di Nardo, M., Degano, M., & Gerada, C. (2021). Influence of the Magnetic Load on High Speed Synchronous Reluctance Machines Design. In IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. https://doi.org/10.1109/IECON48115.2021.9589972

Synchronous reluctance machines are becoming a widespread solution in many engineering areas thanks to their simple rotor structure, the absence of rare-earth permanent magnets and high efficiency. The design of such machines is a widely investigated... Read More about Influence of the Magnetic Load on High Speed Synchronous Reluctance Machines Design.

Modelling, Analysis and Design Considerations of Multi-Phase Bearingless Permanent Magnet Synchronous Machine (2021)
Conference Proceeding
Marfoli, A., Nardo, M. D., Garvey, S., Degano, M., Vashisht, R., Turnbull, R., & Gerada, C. (2021). Modelling, Analysis and Design Considerations of Multi-Phase Bearingless Permanent Magnet Synchronous Machine. In 2021 IEEE Energy Conversion Congress and Exposition (ECCE) (4646-4653). https://doi.org/10.1109/ECCE47101.2021.9595524

This paper presents a general multi-harmonics analytical model able to predict both torque and force behaviour of a multi-phase permanent magnet synchronous machine. This machine topology can be adopted in bearingless applications and in application... Read More about Modelling, Analysis and Design Considerations of Multi-Phase Bearingless Permanent Magnet Synchronous Machine.

Permanent Magnet Reduction by Current Harmonics Injection for Surface Permanent Magnet Machines (2021)
Conference Proceeding
De Gaetano, D., Sala, G., Degano, M., & Gerada, C. (2021). Permanent Magnet Reduction by Current Harmonics Injection for Surface Permanent Magnet Machines. In 2021 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (137-142). https://doi.org/10.1109/wemdcd51469.2021.9425662

This paper presents the analysis of multi-harmonic current injection in multi-three phase surface permanent magnet (SPM) machines. An analytical model, extended to a generic harmonic order, is used to describe and determine the no load flux density,... Read More about Permanent Magnet Reduction by Current Harmonics Injection for Surface Permanent Magnet Machines.

Influence of Rotor Design on Electromagnetic Performance in Interior Permanent Magnet Machines (2020)
Conference Proceeding
Transi, T., Murataliyev, M., Degano, M., Preci, E., Gerada, D., & Gerada, C. (2020). Influence of Rotor Design on Electromagnetic Performance in Interior Permanent Magnet Machines. . https://doi.org/10.1109/iecon43393.2020.9255237

Nowadays, Interior Permanent Magnet Synchronous Machines (IPMSM) are widely adopted in various sectors such as automotive, railway or public transportation (e- buses, trams, etc.). Among the benefits that these machines present, they offer a number o... Read More about Influence of Rotor Design on Electromagnetic Performance in Interior Permanent Magnet Machines.

Rectangular and Random Conductors: AC Losses Evaluations and Manufacturing Considerations (2020)
Conference Proceeding
Preci, E., Valente, G., Bardalai, A., Transi, T., Zou, T., Gerada, D., …Gerada, C. (2020). Rectangular and Random Conductors: AC Losses Evaluations and Manufacturing Considerations. . https://doi.org/10.1109/iecon43393.2020.9254278

This paper presents a comparison between hairpin and random distributed winding in electrical machines for automotive applications. Indeed, the overall performance of an electrical drive system is seriously affected by its winding design. The conside... Read More about Rectangular and Random Conductors: AC Losses Evaluations and Manufacturing Considerations.

Influence of Optimisation Target Functions on Synchronous Reluctance Machines Design (2020)
Conference Proceeding
Korman, O., Nardo, M. D., Degano, M., & Gerada, C. (2020). Influence of Optimisation Target Functions on Synchronous Reluctance Machines Design. . https://doi.org/10.1109/iecon43393.2020.9254529

Synchronous reluctance machines (SynRel) are becoming very attractive for different applications because of their reluctance nature, easy manufacturability and low cost. Their design still represents a challange because of the many degrees of freedom... Read More about Influence of Optimisation Target Functions on Synchronous Reluctance Machines Design.

Multi-Sector Windings For Bearing Relief E-Machine: Saturation and Cross Coupling Effects (2020)
Conference Proceeding
Mahmoud, H., Valente, G., Degano, M., Nardo, M. D., Gerada, C., & James, B. (2020). Multi-Sector Windings For Bearing Relief E-Machine: Saturation and Cross Coupling Effects. . https://doi.org/10.1109/icem49940.2020.9270761

The key driving elements for any electrical machine (EM) used in aerospace and other safety critical applications are the reliability, mass, volume, and efficiency. To reduce mass/volume while satisfying the power required, the option is to increase... Read More about Multi-Sector Windings For Bearing Relief E-Machine: Saturation and Cross Coupling Effects.

Advantages of a Double Three-Phase Winding Layout for a Dual Rotor E-Bike Motor Considering Third Current Harmonic Injection Technique (2020)
Conference Proceeding
Gaetano, D. D., Golovanov, D., Sala, G., Galassini, A., Degano, M., Mahmoud, H., & Gerada, C. (2020). Advantages of a Double Three-Phase Winding Layout for a Dual Rotor E-Bike Motor Considering Third Current Harmonic Injection Technique. In 2020 IEEE Transportation Electrification Conference & Expo (ITEC) (1159-1164). https://doi.org/10.1109/itec48692.2020.9161620

The transportation electrification process is rapidly demanding for drivers with enhanced performance. Modern systems are moving from fossil fuel technologies toward hybrid and fully electric solutions. Consequently, in automotive and motorcycle sect... Read More about Advantages of a Double Three-Phase Winding Layout for a Dual Rotor E-Bike Motor Considering Third Current Harmonic Injection Technique.

SMART: Modular Architecture for Reliable Transportation (2019)
Conference Proceeding
Papadopoulos, S., Galassini, A., Ruksnaitis, L., Farhat, N., Kiselychnyk, O., Midgley, W., & Degano, M. (2019). SMART: Modular Architecture for Reliable Transportation. In IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (7135-7140). https://doi.org/10.1109/IECON.2019.8926931

This paper proposes a new ultra-reliable architecture for fully electric propulsion primarily aimed at the automotive sector. The system considers a direct drive arrangement, minimizing the number of moving components and is based on a network of mul... Read More about SMART: Modular Architecture for Reliable Transportation.

Advantages of Communication in Double Three-Phase Surface Permanent Magnet Machines Fed by Independent Inverters (2019)
Conference Proceeding
Sala, G., Mengoni, M., Tani, A., Galassini, A., & Degano, M. (2019). Advantages of Communication in Double Three-Phase Surface Permanent Magnet Machines Fed by Independent Inverters. In 2019 21st European Conference on Power Electronics and Applications (EPE '19 ECCE Europe)https://doi.org/10.23919/EPE.2019.8915155

This paper deals with a double three-phase Surface Permanent Magnet (SPM) drive where two independent three-phase inverters are supplying the same electrical machine. This work highlights how the magnetic coupling of the two windings affects the cont... Read More about Advantages of Communication in Double Three-Phase Surface Permanent Magnet Machines Fed by Independent Inverters.

Optimized Sizing of IPM Machines for Automotive Traction Application (2019)
Conference Proceeding
Valente, G., Gerada, D., Degano, M., Gerada, C., Foulsham, J., & Beeby, D. (2019). Optimized Sizing of IPM Machines for Automotive Traction Application. In 2019 IEEE International Electric Machines & Drives Conference (IEMDC) (970-975). https://doi.org/10.1109/IEMDC.2019.8785245

This paper presents the implementation of an electrical machine design tool including its overall architecture. The tool is flexible and can be employed for the sizing of any permanent magnet synchronous machine. The case study considered in this wor... Read More about Optimized Sizing of IPM Machines for Automotive Traction Application.

Post -Fault Compensation Control Strategy for Multi-Three-Phase PMSM under Open-Circuit and Short-Circuit Condition (2019)
Conference Proceeding
Rahman, A. A., Galassini, A., Degano, M., Abbas, H., & Bozhko, S. (2019). Post -Fault Compensation Control Strategy for Multi-Three-Phase PMSM under Open-Circuit and Short-Circuit Condition. In Proceedings - 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (121-127). https://doi.org/10.1109/WEMDCD.2019.8887854

This paper presents two post-fault compensation strategies for the distributed current control of a nine-phase Permanent-Magnet Synchronous Machine (PMSM). The dynamic performance in faulty condition is guaranteed by keeping the current loop bandwidt... Read More about Post -Fault Compensation Control Strategy for Multi-Three-Phase PMSM under Open-Circuit and Short-Circuit Condition.

Asymmetrical Flux Density Distribution in Stator Teeth of Surface Permanent Magnet Machines (2019)
Conference Proceeding
Sala, G., De Gaetano, D., Degano, M., & Gerada, C. (2019). Asymmetrical Flux Density Distribution in Stator Teeth of Surface Permanent Magnet Machines. In Proceedings - 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (29-33). https://doi.org/10.1109/WEMDCD.2019.8887831

This work is showing in detail the flux density behaviour in the stator teeth of a synchronous machine. A 3-phase Surface Permanent Magnet (SPM) motor is considered. These motors are widely employed in applications where high efficiency and power den... Read More about Asymmetrical Flux Density Distribution in Stator Teeth of Surface Permanent Magnet Machines.

Synchronous Reluctance Motor Iron Losses: Analytical Model and Optimization (2018)
Conference Proceeding
Mahmoud, H., Degano, M., Bacco, G., Bianchi, N., & Gerada, C. (2018). Synchronous Reluctance Motor Iron Losses: Analytical Model and Optimization. In 2018 IEEE Energy Conversion Congress and Exposition (ECCE) (1640-1647). https://doi.org/10.1109/ECCE.2018.8558292

The complex rotor structure of synchronous reluctance machines causes a high harmonic content in the air-gap flux density and then flux density fluctuations in different iron parts. The importance of determining accurately the total iron losses in th... Read More about Synchronous Reluctance Motor Iron Losses: Analytical Model and Optimization.

Design of PMSM for EMA Employed in Secondary Flight Control Systems (2018)
Conference Proceeding
Giangrande, P., Al-Timimy, A., Galassini, A., Papadopoulos, S., Degano, M., & Galea, M. (2018). Design of PMSM for EMA Employed in Secondary Flight Control Systems. In Proceedings - 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607467

© 2018 IEEE. The more electric aircraft (MEA) initiative aims to improve weight, fuel consumption and maintenance costs of the aircraft, by increasing the use of electric power in actuation systems. Considering this scenario, electromechanical actuat... Read More about Design of PMSM for EMA Employed in Secondary Flight Control Systems.

The Influence of Stator Material on the Power Density and Iron Loss of a High-Performace Starter-Generator for More Electric Aircraft (2018)
Conference Proceeding
Golovanov, D., Xu, Z., Gerada, D., Degano, M., Vakil, G., & Gerada, C. (2018). The Influence of Stator Material on the Power Density and Iron Loss of a High-Performace Starter-Generator for More Electric Aircraft. In 2018 21st International Conference on Electrical Machines and Systems (ICEMS) (169-173). https://doi.org/10.23919/ICEMS.2018.8549390

Maximizing the power density as well as efficiency are two of the main critical aspects for engineers who are designing electrical machines for aerospace applications. Iron losses have a significant impact on the total machine efficiency, thermal sta... Read More about The Influence of Stator Material on the Power Density and Iron Loss of a High-Performace Starter-Generator for More Electric Aircraft.

A Novel Newton-Raphson-Based Searching Method for the MTPA Control of Pmasynrm Considering Magnetic and Cross Saturation (2018)
Conference Proceeding
Wang, S., Degano, M., Kang, J., Galassini, A., & Gerada, C. (2018). A Novel Newton-Raphson-Based Searching Method for the MTPA Control of Pmasynrm Considering Magnetic and Cross Saturation. In Proceedings 2018 XIII International Conference on Electrical Machines (ICEM) (1360-1366). https://doi.org/10.1109/ICELMACH.2018.8506853

Maximum torque per ampere control (MTPA) takes full advantage of the reluctance torque aiming at the minimum copper loss, which can increase the torque output under the minimum current conditions. The traditional MTPA method makes use of equations wi... Read More about A Novel Newton-Raphson-Based Searching Method for the MTPA Control of Pmasynrm Considering Magnetic and Cross Saturation.

Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM (2018)
Conference Proceeding
Al-Timimy, A., Giangrande, P., Degano, M., Galea, M., & Gerada, C. (2018). Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM. In Proceedings - 2018 XIII International Conference on Electrical Machines (ICEM) (263-269). https://doi.org/10.1109/ICELMACH.2018.8507166

This paper presents a detailed investigation of AC copper losses in high-speed high-power density permanent magnet synchronous machine. For parallel strands winding, it is not easy to accurately estimate the AC copper losses using finite element mode... Read More about Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM.