All Outputs (26)

Optimal Manufacturing Configuration Selection: Sequential Decision Making and Optimization using Reinforcement Learning (2023)
Journal Article
Torayev, A., Abadia, J. J. P., Martínez-Arellano, G., Cuesta, M., Chaplin, J. C., Larrinaga, F., …Ratchev, S. (2023). Optimal Manufacturing Configuration Selection: Sequential Decision Making and Optimization using Reinforcement Learning. Procedia CIRP, 120, 986-991. https://doi.org/10.1016/j.procir.2023.09.112

In manufacturing, different costs must be considered when selecting the optimal manufacturing configuration. Costs include manufacturing costs, material costs, labor costs, and overhead costs. Optimal manufacturing configurations are those that minim... Read More about Optimal Manufacturing Configuration Selection: Sequential Decision Making and Optimization using Reinforcement Learning.

Efficient decision-making in SMEs: leveraging knowledge graphs with Neo4j and AI vision (2023)
Conference Proceeding
Mo, F., Ur Rehman, H. U., Elshafei, B., Chaplin, J. C., Sanderson, D., Martínez-Arellano, G., & Ratchev, S. (2023). Efficient decision-making in SMEs: leveraging knowledge graphs with Neo4j and AI vision. In Low-Cost Digital Solutions for Industrial Automation (LoDiSA 2023). https://doi.org/10.1049/icp.2023.1736

In the evolving digital landscape, Small and Medium-sized Enterprises (SMEs) grapple with the intricate task of managing vast manufacturing data while operating within budgetary constraints. Addressing this dichotomy, our research introduces an innov... Read More about Efficient decision-making in SMEs: leveraging knowledge graphs with Neo4j and AI vision.

PLC orchestration automation to enhance human–machine integration in adaptive manufacturing systems (2023)
Journal Article
Mo, F., Ugarte Querejeta, M., Hellewell, J., Rehman, H. U., Illarramendi Rezabal, M., Chaplin, J. C., …Ratchev, S. (2023). PLC orchestration automation to enhance human–machine integration in adaptive manufacturing systems. Journal of Manufacturing Systems, 71, 172-187. https://doi.org/10.1016/j.jmsy.2023.07.015

Current approaches to manufacturing must evolve to respond to increasing demands for short product life cycles and customised products. Adaptive manufacturing systems integrate advanced technologies, automation, and data-driven methodologies to devel... Read More about PLC orchestration automation to enhance human–machine integration in adaptive manufacturing systems.

Semantic models and knowledge graphs as manufacturing system reconfiguration enablers (2023)
Journal Article
Mo, F., Chaplin, J. C., Sanderson, D., Martínez-Arellano, G., & Ratchev, S. (2024). Semantic models and knowledge graphs as manufacturing system reconfiguration enablers. Robotics and Computer-Integrated Manufacturing, 86, Article 102625. https://doi.org/10.1016/j.rcim.2023.102625

Reconfigurable Manufacturing System (RMS) provides a cost-effective approach for manufacturers to adapt to fluctuating market demands by reconfiguring assets through automated analysis of asset utilization and resource allocation. Achieving this auto... Read More about Semantic models and knowledge graphs as manufacturing system reconfiguration enablers.

Optimal Selection of Manufacturing Configurations Using Object-Oriented and Mathematical Data Models (2023)
Book Chapter
Torayev, A., Wang, Z., Martínez-Arellano, G., Chaplin, J. C., Sanderson, D., & Ratchev, S. (2023). Optimal Selection of Manufacturing Configurations Using Object-Oriented and Mathematical Data Models. In L. Tang (Ed.), Industrial Engineering and Applications (3-12). IOS Press. https://doi.org/10.3233/ATDE230025

In this work, we optimize manufacturing configurations, i.e., the set of necessary assets, using the known capabilities and capacities of manufacturing equipment. In particular, the work provides an Object-Oriented data model and the translation of t... Read More about Optimal Selection of Manufacturing Configurations Using Object-Oriented and Mathematical Data Models.

Online and Modular Energy Consumption Optimization of Industrial Robots (2023)
Journal Article
Torayev, A., Martinez-Arellano, G., Chaplin, J. C., Sanderson, D., & Ratchev, S. (2024). Online and Modular Energy Consumption Optimization of Industrial Robots. IEEE Transactions on Industrial Informatics, 20(2), 1198-1207. https://doi.org/10.1109/TII.2023.3272692

Industrial robots contribute to a considerable amount of energy consumption in manufacturing. However, modeling the energy consumption of industrial robots is a complex problem as it requires considering components such as the robot controller, fans... Read More about Online and Modular Energy Consumption Optimization of Industrial Robots.

A framework for manufacturing system reconfiguration and optimisation utilising digital twins and modular artificial intelligence (2023)
Journal Article
Mo, F., Rehman, H. U., Monetti, F. M., Chaplin, J. C., Sanderson, D., Popov, A., …Ratchev, S. (2023). A framework for manufacturing system reconfiguration and optimisation utilising digital twins and modular artificial intelligence. Robotics and Computer-Integrated Manufacturing, 82, Article 102524. https://doi.org/10.1016/j.rcim.2022.102524

Digital twins and artificial intelligence have shown promise for improving the robustness, responsiveness, and productivity of industrial systems. However, traditional digital twin approaches are often only employed to augment single, static systems... Read More about A framework for manufacturing system reconfiguration and optimisation utilising digital twins and modular artificial intelligence.

Self-configuration of a Robotic Platform to support a self-organized Manufacturing Process (2022)
Conference Proceeding
Jimenez, L. A. E., Sanderson, D., Chaplin, J. C., & Barata, J. (2022). Self-configuration of a Robotic Platform to support a self-organized Manufacturing Process. In IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society. https://doi.org/10.1109/IECON49645.2022.9968868

Self-configuration in manufacturing is a key trend to generate adaptable production systems. Different product requirements need different machine settings and continuous software update. Existing approaches usually assume that manufacturing resource... Read More about Self-configuration of a Robotic Platform to support a self-organized Manufacturing Process.

Automating the Generation of MBD-Driven Assembly Work Instruction Documentation for Aircraft Components (2022)
Conference Proceeding
Papadaki, A. R., Bacharoudis, K., Bainbridge, D., Burbage, N., Turner, A., Sanderson, D., …Ratchev, S. M. (2023). Automating the Generation of MBD-Driven Assembly Work Instruction Documentation for Aircraft Components. In Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus: Proceedings of FAIM 2022, June 19–23, 2022, Detroit, Michigan, USA (394-403). https://doi.org/10.1007/978-3-031-18326-3_38

The classical approach to the creation of assembly work instructions for high value, complex products is time-consuming and prone to error. It requires a process engineer to write the work instructions step-by-step and manually insert specific techni... Read More about Automating the Generation of MBD-Driven Assembly Work Instruction Documentation for Aircraft Components.

A Framework for Manufacturing System Reconfiguration based on Artificial Intelligence and Digital Twin (2022)
Conference Proceeding
Mo, F., Chaplin, J. C., Sanderson, D., Rehman, H. U., Monetti, F. M., Maffei, A., & Ratchev, S. (2022). A Framework for Manufacturing System Reconfiguration based on Artificial Intelligence and Digital Twin. In Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus Proceedings of FAIM 2022, June 19-23, 2022, Detroit, Michigan, USA, Volume 2 (361-373). https://doi.org/10.1007/978-3-031-18326-3_35

The application of digital twins and artificial intelligence to manufacturing has shown potential in improving system resilience, responsiveness, and productivity. Traditional digital twin approaches are generally applied to single, static systems to... Read More about A Framework for Manufacturing System Reconfiguration based on Artificial Intelligence and Digital Twin.

Reference Architecture for Space Production Systems (2022)
Conference Proceeding
Sanderson, D., Brown, A., Leadbetter, J., Gordon, A., Shires, E., & Ratchev, S. (2022). Reference Architecture for Space Production Systems. In 9th European Conference for Aeronautics and Space Sciences

In this paper, we propose a conceptual framework and reference architecture for space production systems (SPS). A review of the existing digital architecture approaches and standards for space systems identifies a number of potential avenues. Based o... Read More about Reference Architecture for Space Production Systems.

Towards Modular and Plug-and-Produce Manufacturing Apps (2022)
Journal Article
Torayev, A., Martínez-Arellano, G., Chaplin, J. C., Sanderson, D., & Ratchev, S. (2022). Towards Modular and Plug-and-Produce Manufacturing Apps. Procedia CIRP, 107, 1257-1262. https://doi.org/10.1016/j.procir.2022.05.141

Industry 4.0 redefines manufacturing systems as smart and connected systems where software solutions provide additional capabilities to the manufacturing equipment. However, the connection of manufacturing equipment with software solutions is challen... Read More about Towards Modular and Plug-and-Produce Manufacturing Apps.

Context-Aware Plug and Produce for Robotic Aerospace Assembly (2021)
Conference Proceeding
Sanderson, D., Shires, E., Chaplin, J. C., Brookes, H., Liaqat, A., & Ratchev, S. (2021). Context-Aware Plug and Produce for Robotic Aerospace Assembly. . https://doi.org/10.1007/978-3-030-72632-4_13

Aerospace production systems face increasing requirements for flexibility and reconfiguration, along with considerations of cost, utilisation, and efficiency. This drives a need for systems with a small number of automation platforms (e.g. industrial... Read More about Context-Aware Plug and Produce for Robotic Aerospace Assembly.

Affordable data integration approach for production enterprises (2020)
Journal Article
Sanderson, D., Chaplin, J. C., & Ratchev, S. (2020). Affordable data integration approach for production enterprises. Procedia CIRP, 93, 616-621. https://doi.org/10.1016/j.procir.2020.04.124

© 2020 The Authors. The manufacturing industries in a number of high-labour-cost economies are undergoing a shift towards increased automation and intelligence typified by the ‘Industry 4.0' paradigm. Advances from computer science research including... Read More about Affordable data integration approach for production enterprises.

Implementing large-scale Aerospace Assembly 4.0 demonstration systems? (2020)
Journal Article
Sanderson, D., Turner, A., Shires, E., Chaplin, J. C., & Ratchev, S. (2020). Implementing large-scale Aerospace Assembly 4.0 demonstration systems?. IFAC papers online, 53(2), 10267-10274. https://doi.org/10.1016/j.ifacol.2020.12.2759

The Future Automated Aerospace Assembly phase 1 technology Demonstrator (FA3D) was commissioned at the University of Nottingham and used to demonstrate concepts from the EPSRC Evolvable Assembly Systems project in specific industrial use cases. A num... Read More about Implementing large-scale Aerospace Assembly 4.0 demonstration systems?.

A Function-Behaviour-Structure design methodology for adaptive production systems (2019)
Journal Article
Sanderson, D., Chaplin, J. C., & Ratchev, S. (2019). A Function-Behaviour-Structure design methodology for adaptive production systems. International Journal of Advanced Manufacturing Technology, 1-12. https://doi.org/10.1007/s00170-019-03823-x

Adaptive production systems are a key trend in modern advanced manufacturing. This stems from the requirement for the system to respond to disruption , either in the form of product changes or changes to other operational parameters. The design and r... Read More about A Function-Behaviour-Structure design methodology for adaptive production systems.

Demonstration of Transformable Manufacturing Systems through the Evolvable Assembly Systems Project (2019)
Journal Article
Sanderson, D., Turner, A., Shires, E., Chaplin, J., & Ratchev, S. (2019). Demonstration of Transformable Manufacturing Systems through the Evolvable Assembly Systems Project. SAE Technical Papers, Article 2019-01-1363. https://doi.org/10.4271/2019-01-1363

© 2019 SAE International. All Rights Reserved. Evolvable Assembly Systems is a five year UK research council funded project into flexible and reconfigurable manufacturing systems. The principal goal of the research programme has been to define and va... Read More about Demonstration of Transformable Manufacturing Systems through the Evolvable Assembly Systems Project.

Synthesising process controllers from formal models of transformable assembly systems (2019)
Journal Article
De Silva, L., Felli, P., Sanderson, D., Chaplin, J. C., Logan, B., & Ratchev, S. (2019). Synthesising process controllers from formal models of transformable assembly systems. Robotics and Computer-Integrated Manufacturing, 58, 130-144. https://doi.org/10.1016/j.rcim.2019.01.014

When producing complex and highly customisable products in low volumes (or in 'batch sizes of one'), automation of production systems is critical for competitiveness and profitability in high labour-cost economies. To facilitate batch-size-of-one pro... Read More about Synthesising process controllers from formal models of transformable assembly systems.

Measurement assisted assembly for high accuracy aerospace manufacturing (2018)
Conference Proceeding
Drouot, A., Zhao, R., Irving, L., Sanderson, D., & Ratchev, S. (2018). Measurement assisted assembly for high accuracy aerospace manufacturing.

Measurement Assisted Assembly is a key concept for the modernisation of aerospace assembly processes, i.e. improving their efficiency while reducing the manufacturing costs. This concept suggests a paradigm shift in the assembly of high-complexity pr... Read More about Measurement assisted assembly for high accuracy aerospace manufacturing.

Conceptual framework for ubiquitous cyber-physical assembly systems in airframe assembly (2018)
Conference Proceeding
Sanderson, D., Chaplin, J. C., & Ratchev, S. (2018). Conceptual framework for ubiquitous cyber-physical assembly systems in airframe assembly.

Current sectoral drivers for the manufacturing of complex products - such as airframe assembly -require new manufacturing system paradigms to meet them. In this paper, we propose a conceptual framework for cyber-physical systems driven by ubiquitous... Read More about Conceptual framework for ubiquitous cyber-physical assembly systems in airframe assembly.