All Outputs (42)

A Taguchi-LHS-RSM Double-Staged Approach for Design Optimization of Self-Ventilated Cooling Systems Utilized in PMSMs (2023)
Conference Proceeding
Zhu, G., Xu, Z., Zhang, F., Gerada, C., & Gerada, D. (2023). A Taguchi-LHS-RSM Double-Staged Approach for Design Optimization of Self-Ventilated Cooling Systems Utilized in PMSMs. In 26th International Conference on Electrical Machines and Systems (ICEMS). https://doi.org/10.1109/icems59686.2023.10344616

Thermal management is critical for high-power-density permanent magnet synchronous machines (PMSMs). To realize the efficient and effective design optimization of self-ventilated air cooling systems for PMSMs, in this paper, a Taguchi-preconditioned... Read More about A Taguchi-LHS-RSM Double-Staged Approach for Design Optimization of Self-Ventilated Cooling Systems Utilized in PMSMs.

Fast Sizing Tool and Optimization Technique for Concentrated Wound Slotless Outer Rotor Motor for eVTOL Application (2022)
Conference Proceeding
Dave, N., Gerada, D., Vakil, G., Zhang, H., Shi, B., Zhang, F., …Gerada, C. (2022). Fast Sizing Tool and Optimization Technique for Concentrated Wound Slotless Outer Rotor Motor for eVTOL Application. In 2022 International Conference on Electrical Machines (ICEM) (2094-2099). https://doi.org/10.1109/ICEM51905.2022.9910584

This paper aims to present the feasibility and advantages of slotless motors for electric aircraft applications. Currently, eVTOL (electric vertical takeoff and landing) aircraft are equipped with a slotted motor with concentrated windings and an out... Read More about Fast Sizing Tool and Optimization Technique for Concentrated Wound Slotless Outer Rotor Motor for eVTOL Application.

Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications (2022)
Conference Proceeding
Tameemi, A., Degano, M., Di Nardo, M., Murataliyev, M., Gerada, D., Xu, Z., & Gerada, C. (2022). Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications. In 2022 International Conference on Electrical Machines (ICEM) (807-813). https://doi.org/10.1109/icem51905.2022.9910911

Permanent magnet synchronous motors are very suitable in applications demanding high power density with high performance requirements, such as in aerospace actuators. Achieving high performance targets while keeping the total weight of the electrical... Read More about Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications.

Analytical Model for the Open Circuit Field due to Different Magnetization Patterns of the rotor in the Slotless Machines (2022)
Conference Proceeding
Dave, N., Gerada, D., Vakil, G., Zhang, H., Li, J., & Gerada, C. (2022). Analytical Model for the Open Circuit Field due to Different Magnetization Patterns of the rotor in the Slotless Machines. In 2022 International Conference on Electrical Machines (ICEM) (1204-1210). https://doi.org/10.1109/icem51905.2022.9910580

From the existing literature, the open circuit field due to different magnetisations of the rotor magnets is known. This includes field due to parallel, radial and Halbach magnetisation. This paper presents the generalised analytical model to represe... Read More about Analytical Model for the Open Circuit Field due to Different Magnetization Patterns of the rotor in the Slotless Machines.

Carbon Emission Analysis of Electrical Machines (2021)
Conference Proceeding
Zhang, X., Xu, Z., Gerada, C., & Gerada, D. (2021). Carbon Emission Analysis of Electrical Machines. In 2021 24th International Conference on Electrical Machines and Systems (ICEMS) (1678-1683). https://doi.org/10.23919/ICEMS52562.2021.9634279

The industry places increased importance on carbon reduction. Many are focused on lowering the fuel consumption of electrical machines, however, carbon emissions from the acquisition of raw materials and the energy consumption of manufacturing proces... Read More about Carbon Emission Analysis of Electrical Machines.

Improving the Saliency of a High Speed SynRel Rotor by using High Strength Martensitic Sleeve (2021)
Conference Proceeding
Ram Kumar, R. M., Vakil, G., La Rocca, A., Gerada, D., Gerada, C., & Fernandes, B. G. (2021). Improving the Saliency of a High Speed SynRel Rotor by using High Strength Martensitic Sleeve. In 2021 International Conference on Sustainable Energy and Future Electric Transportation (SEFET). https://doi.org/10.1109/sefet48154.2021.9375705

High strength magnetic steel laminations are the invariable choice to achieve the power density demands of high speed electric machines required in the automotive industry. However, the cost competitive automobile market, favours the use of conventio... Read More about Improving the Saliency of a High Speed SynRel Rotor by using High Strength Martensitic Sleeve.

AC loss Analysis in Winding of Electrical Machines with varying Strands-in-hand and Bundle Shapes (2020)
Conference Proceeding
Bardalai, A., Gerada, D., Xu, Z., & Gerada, C. (2020). AC loss Analysis in Winding of Electrical Machines with varying Strands-in-hand and Bundle Shapes. In 2020 23rd International Conference on Electrical Machines and Systems (ICEMS) (845-850). https://doi.org/10.23919/icems50442.2020.9290897

This paper presents an investigation into the sensitivity of high-frequency AC effects on the winding with varying number of parallel strands. Based on numerical analysis, a methodology to segregate the losses into components is presented. It is show... Read More about AC loss Analysis in Winding of Electrical Machines with varying Strands-in-hand and Bundle Shapes.

Comparison of slotted and slotless PM machines for high kW/kg aerospace applications (2020)
Conference Proceeding
Dave, N., Vakil, G., Xu, Z., Gerada, C., Zhang, H., & Gerada, D. (2020). Comparison of slotted and slotless PM machines for high kW/kg aerospace applications. . https://doi.org/10.23919/icems50442.2020.9291221

With the ambitious targeted emissions reduction, the aircraft industry is moving towards drastically different aircraft architectures including hybrid-electric. These in turn require electrical machines with a step change improvement in power-density... Read More about Comparison of slotted and slotless PM machines for high kW/kg aerospace applications.

Rectangular and Random Conductors: AC Losses Evaluations and Manufacturing Considerations (2020)
Conference Proceeding
Preci, E., Valente, G., Bardalai, A., Transi, T., Zou, T., Gerada, D., …Gerada, C. (2020). Rectangular and Random Conductors: AC Losses Evaluations and Manufacturing Considerations. . https://doi.org/10.1109/iecon43393.2020.9254278

This paper presents a comparison between hairpin and random distributed winding in electrical machines for automotive applications. Indeed, the overall performance of an electrical drive system is seriously affected by its winding design. The conside... Read More about Rectangular and Random Conductors: AC Losses Evaluations and Manufacturing Considerations.

Influence of Rotor Design on Electromagnetic Performance in Interior Permanent Magnet Machines (2020)
Conference Proceeding
Transi, T., Murataliyev, M., Degano, M., Preci, E., Gerada, D., & Gerada, C. (2020). Influence of Rotor Design on Electromagnetic Performance in Interior Permanent Magnet Machines. . https://doi.org/10.1109/iecon43393.2020.9255237

Nowadays, Interior Permanent Magnet Synchronous Machines (IPMSM) are widely adopted in various sectors such as automotive, railway or public transportation (e- buses, trams, etc.). Among the benefits that these machines present, they offer a number o... Read More about Influence of Rotor Design on Electromagnetic Performance in Interior Permanent Magnet Machines.

Influence of Airgap Length on Performance of High Power PM-Assisted Syn-Rel Machines (2020)
Conference Proceeding
Zou, T., Gerada, D., Walker, A., Vakil, G., La Rocca, S., La Rocca, A., …Gerada, C. (2020). Influence of Airgap Length on Performance of High Power PM-Assisted Syn-Rel Machines. In 2020 IEEE Energy Conversion Congress and Exposition (ECCE) (1357-1363). https://doi.org/10.1109/ecce44975.2020.9235712

In recent years, synchronous reluctance (Syn-Rel) machines are research hotspots in variable speed motor drives due to their robust rotor structure and wide constant power speed range (CPSR). More practically, when kVA limitation is considered, embed... Read More about Influence of Airgap Length on Performance of High Power PM-Assisted Syn-Rel Machines.

SISO Control Strategy of Resonant Dual Active Bridge with a Tuned CLC Network (2020)
Conference Proceeding
Wang, M., Yang, B., Xu, L., Li, J., Gerada, D., Gu, C., …Li, Y. (2020). SISO Control Strategy of Resonant Dual Active Bridge with a Tuned CLC Network. In 2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe). https://doi.org/10.23919/epe20ecceeurope43536.2020.9215606

This paper proposed a linear state-space model for a resonant dual active bridge with a tuned capacitor-inductor-capacitor network which is applied to an energy storage system. The proposed model is used for predicting the behavior of the proposed sy... Read More about SISO Control Strategy of Resonant Dual Active Bridge with a Tuned CLC Network.

An Analytical Approach for the Design of Innovative Hairpin Winding Layouts (2020)
Conference Proceeding
Arzillo, A., Nuzzo, S., Braglia, P., Franceschini, G., Barater, D., Gerada, D., & Gerada, C. (2020). An Analytical Approach for the Design of Innovative Hairpin Winding Layouts. . https://doi.org/10.1109/icem49940.2020.9270927

This work deals with an analytical approach aimed at accurately predicting Joule losses in innovative hairpin winding layouts. While hairpin windings are seeing an everincreasing use in automotive and aerospace applications due to their inherently hi... Read More about An Analytical Approach for the Design of Innovative Hairpin Winding Layouts.

Optimized Magnet wire size and Slot winding height for minimum AC losses in a Traction Machine (2020)
Conference Proceeding
Bardalai, A., Gerada, D., Xu, Z., & Gerada, C. (2020). Optimized Magnet wire size and Slot winding height for minimum AC losses in a Traction Machine. In 2020 International Conference on Electrical Machines (ICEM) (266-271). https://doi.org/10.1109/ICEM49940.2020.9270762

The demand for high performance electrical machines that combine high power density (kW/kg or kW/L), light – weighting and high efficiency have become more and more important in recent years. In these machines, mitigation of the parasitic losses asso... Read More about Optimized Magnet wire size and Slot winding height for minimum AC losses in a Traction Machine.

Challenges and Future opportunities of Hairpin Technologies (2020)
Conference Proceeding
Arzillo, A., Braglia, P., Nuzzo, S., Barater, D., Franceschini, G., Gerada, D., & Gerada, C. (2020). Challenges and Future opportunities of Hairpin Technologies. . https://doi.org/10.1109/ISIE45063.2020.9152417

Hairpin windings are seeing an ever-increasing application and development in electrical machines designed for high power and torque densities. In fact, due to their inherently high fill factor, they are very attractive in applications, such as trans... Read More about Challenges and Future opportunities of Hairpin Technologies.

A Hybrid Computational Tool to Analyze the Performance of Electric Machines with Reduced Content of Permanent Magnet (2020)
Conference Proceeding
Ram Kumar, R. M., Khowja, M. R., Vakil, G., Gerada, D., Gerada, C., Paciura, K., & Fernandes, B. G. (2020). A Hybrid Computational Tool to Analyze the Performance of Electric Machines with Reduced Content of Permanent Magnet. In 2020 IEEE Transportation Electrification Conference & Expo (ITEC) (340-345). https://doi.org/10.1109/itec48692.2020.9161631

Electric vehicles (EVs) are equipped with interior permanent magnet (IPM) or permanent magnet assisted synchronous reluctance (PM-SynRel) machines because of their superior performance in field weakening region. The effect of saturation is more prono... Read More about A Hybrid Computational Tool to Analyze the Performance of Electric Machines with Reduced Content of Permanent Magnet.

Sensitivity Analysis of Machine Components Thermal Properties Effects on Winding Temperature (2019)
Conference Proceeding
Zhang, F., Gerada, D., Xu, Z., Zhang, H., & Gerada, C. (2019). Sensitivity Analysis of Machine Components Thermal Properties Effects on Winding Temperature. In 2019 22nd International Conference on Electrical Machines and Systems (ICEMS). https://doi.org/10.1109/ICEMS.2019.8922095

This paper investigates the sensitivity analysis of winding temperature to key parameters in electrical machine thermal design. With a validated 3D thermal model based on an existing 75kW traction machine for an electric vehicle, the methodology of t... Read More about Sensitivity Analysis of Machine Components Thermal Properties Effects on Winding Temperature.

Multi-physics Design Optimisation of PM-assisted Synchronous Reluctance Motor for Traction Application (2019)
Conference Proceeding
Al-Ani, M., Walker, A., Vakil, G., Ramanathan, R., Zou, T., La Rocca, S., …McQueen, A. (2019). Multi-physics Design Optimisation of PM-assisted Synchronous Reluctance Motor for Traction Application. In Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (4353-4359). https://doi.org/10.1109/IECON.2019.8926697

Recently, the synchronous reluctance machine limits have been pushed toward meeting the requirements of traction applications. A skilled electromagnetic architecture of a synchronous reluctance machine with the help of permanent magnets can push the... Read More about Multi-physics Design Optimisation of PM-assisted Synchronous Reluctance Motor for Traction Application.

Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle (2019)
Conference Proceeding
La Rocca, S., La Rocca, A., Walker, A., Vakil, G., Gerada, D., Al-Ani, M., …Paciura, K. (2019). Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle. In Proceedings: 2019 International Conference on Electrotechnical Complexes and Systems (ICOECS) (1-5). https://doi.org/10.1109/ICOECS46375.2019.8949929

Computational Fluid Dynamics (CFD) was used to carry out a fluid flow and thermal investigation of a high power dense traction machine for electric commercial vehicle. One of the features of the machine design considered is the high Length/Diameter (... Read More about Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle.

High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles (2019)
Conference Proceeding
Kumar, R. M. R., Zou, T., La Rocca, A., Vakil, G., Gerada, D., Walker, A., …Fernandes, B. G. (2019). High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles. In IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (1083-1088). https://doi.org/10.1109/IECON.2019.8927523

High power density and high torque density are the fundamental requirements for electric machines used in traction application. The former is obtained by potentially increasing the speed of the machine while the latter by using high energy density ra... Read More about High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles.