Latest developments on the shielding effectiveness measurements of materials and gaskets in reverberation chambers

Abstract

In this study, the authors present the latest developments on the measurements for the shielding effectiveness (SE) of gaskets and materials in reverberation chambers (RCs). A variant method, where the insertion loss of the fixture is achieved from the SE of the fixture with no sample in the aperture is found; it is appropriate for gaskets and for any flat material having a sufficiently high reflectivity at least on one side. A simple and usable condition under which the simplest method for the SE measurements of gaskets and materials in RCs can be used is also given, as well as particular cases where it can be directly applied are shown. This method, whose applicability is enhanced in this study, can be used for gaskets and any flat sample. Such developments simplify measurement setup and associated procedures. Comparisons of results support the methods for the SE measurements of gaskets and material in RCs shown in this study.

Citation

Gifuni, A., Gradoni, G., Smartt, C., Greedy, S., Villalón, A. M., Bastianelli, L., …Thomas, D. (2019). Latest developments on the shielding effectiveness measurements of materials and gaskets in reverberation chambers. IET Science Measurement and Technology, 14(4), 435-445. https://doi.org/10.1049/iet-smt.2019.0242

• Journal Article Type: Article
• Acceptance Date: Dec 9, 2019
• Online Publication Date: Dec 23, 2019
• Publication Date: Dec 19, 2019
• Deposit Date: Feb 28, 2020
• Publicly Available Date: Feb 28, 2020
• Journal: IET Science, Measurement & Technology
• Print ISSN: 1751-8822
• Electronic ISSN: 1751-8830
• Publisher: Institution of Engineering and Technology (IET)
• Peer Reviewed: Peer Reviewed
• Volume: 14
• Issue: 4
• Pages: 435-445
• DOI: https://doi.org/10.1049/iet-smt.2019.0242
• Keywords: Electrical and Electronic Engineering; Atomic and Molecular Physics, and Optics
• Public URL: https://nottingham-repository.worktribe.com/output/4051094
• Publisher URL: https://digital-library.theiet.org/content/journals/10.1049/iet-smt.2019.0242
• Additional Information: This paper is a postprint of a paper submitted to and accepted for publication in IET Science, Measurement & Technology and is subject to Institution of Engineering and Technology Copyright. The copy of record is available at the IET Digital Library.