Skip to main content

Research Repository

Advanced Search

An investigation of the effect of pre-straining on the creep behaviour of a P91 steel at 600°C using impression creep testing

Brett, S. J.; Dyson, C.; Maskill, S.; Bridges, A.; Sun, W.

An investigation of the effect of pre-straining on the creep behaviour of a P91 steel at 600°C using impression creep testing Thumbnail


Authors

S. J. Brett

C. Dyson

S. Maskill

A. Bridges

W. Sun



Abstract

© 2020 Elsevier B.V. This paper investigates the effect of high temperature tensile strain on subsequent creep strength in a grade 91 steel using impression creep testing. The grade 91 material investigated has been tested in two different microstructural conditions, in the normal martensitic condition and in an aberrant mis-heat treated condition in which the microstructure is 100% ferrite. The latter condition is of interest because of its widespread occurrence on operating power plant. The two microstructural conditions were confirmed by hardness mapping and Electron Back Scattered Diffraction (EBSD). Previous investigations have used pre-strained uniaxial creep specimens to investigate this effect, but the present work has utilised the specialised small-scale impression creep testing technique to test material obtained at a number of positions along the axes of failed hot tensile specimens. This allowed impression creep samples to be extracted at various pre-strains for investigation and for a wide range of hot tensile pre-strain to be investigated. The two microstructural conditions have shown a divergence in behaviour, with the normal martensitic material showing little change in creep strength with increasing pre-strain and the aberrant material increasing markedly in creep strength with increasing pre-strain.

Citation

Brett, S. J., Dyson, C., Maskill, S., Bridges, A., & Sun, W. (2020). An investigation of the effect of pre-straining on the creep behaviour of a P91 steel at 600°C using impression creep testing. Materials Science and Engineering: A, 776, Article 139032. https://doi.org/10.1016/j.msea.2020.139032

Journal Article Type Article
Acceptance Date Jan 29, 2020
Online Publication Date Feb 3, 2020
Publication Date Mar 3, 2020
Deposit Date Jan 30, 2020
Publicly Available Date Mar 28, 2024
Journal Materials Science and Engineering: A
Print ISSN 0921-5093
Publisher Elsevier
Peer Reviewed Peer Reviewed
Volume 776
Article Number 139032
DOI https://doi.org/10.1016/j.msea.2020.139032
Keywords Mechanical Engineering; General Materials Science; Mechanics of Materials; Condensed Matter Physics
Public URL https://nottingham-repository.worktribe.com/output/3832783
Publisher URL https://www.sciencedirect.com/science/article/pii/S0921509320301210
Additional Information This article is maintained by: Elsevier; Article Title: An investigation of the effect of pre-straining on the creep behaviour of a P91 steel at 600°C using impression creep testing; Journal Title: Materials Science and Engineering: A; CrossRef DOI link to publisher maintained version: https://doi.org/10.1016/j.msea.2020.139032; Content Type: article; Copyright: © 2020 Elsevier B.V. All rights reserved.

Files




You might also like



Downloadable Citations