Skip to main content

Research Repository

Advanced Search

Development a modified crossing point temperature (CPTHR) method to assess spontaneous combustion propensity of coal and its chemo-metric analysis

Mohalik, N.K.; Lester, E.; Lowndes, I.S.

Development a modified crossing point temperature (CPTHR) method to assess spontaneous combustion propensity of coal and its chemo-metric analysis Thumbnail


Authors

N.K. Mohalik

IAN LOWNDES ian.lowndes@nottingham.ac.uk
Associate Professor and Reader in Environmental Engineering



Abstract

Spontaneous combustion of Indian coals was investigated using spontaneous combustion rig at University of Nottingham, UK to assess their susceptibility. In the present study authors have used eleven coal samples collected from the Jharia coalfield (JCF), India. Both thermal as well as gas profiles from spontaneous combustion rig were studied critically to develop a modified crossing point temperature to assess the spontaneous combustion propensity of coal. The product of combustion gases (CO, CO2, CH4, and H2) emitted from spontaneous combustion rig within the temperature range between ambient and 300 0C of these coal samples were studied. The initial product of combustion gas i.e. CO followed by H2 indicates propensity towards oxidation of coal in laboratory condition for Jharia coalfield. The temperatures at which CO and H2 releases in the level of 50ppm (TCO50, TH250), crossing point temperature of coal (CPTCT) (temperature of coal and bath temperature is same) and modified crossing point temperature of coal (CPTHR) (temperature where dT/dt is equal to 2.0 oCmin-1 because heating rate is double of programme temperature 1 oCmin-1) determined from spontaneous combustion rig categorises the coal as per their propensity to spontaneous combustion. The results of these methods have been compared with other standard method i.e. crossing point temperature method – India, which is widely adopted in Indian regulatory bodies to verify the suitability of this method.

Citation

Mohalik, N., Lester, E., & Lowndes, I. (2018). Development a modified crossing point temperature (CPTHR) method to assess spontaneous combustion propensity of coal and its chemo-metric analysis. Journal of Loss Prevention in the Process Industries, 56, 359-369. https://doi.org/10.1016/j.jlp.2018.09.00

Journal Article Type Article
Acceptance Date Sep 9, 2018
Online Publication Date Sep 12, 2018
Publication Date 2018-11
Deposit Date Sep 17, 2018
Publicly Available Date Sep 13, 2019
Print ISSN 0950-4230
Electronic ISSN 1873-3352
Publisher Elsevier
Peer Reviewed Peer Reviewed
Volume 56
Pages 359-369
DOI https://doi.org/10.1016/j.jlp.2018.09.00
Keywords Spontaneous Combustion, Spontaneous combustion Rig, Crossing Point Temperature
Public URL https://nottingham-repository.worktribe.com/output/1078275
Publisher URL https://www.sciencedirect.com/science/article/pii/S0950423018303176?via%3Dihub

Files




You might also like



Downloadable Citations