Skip to main content

Research Repository

See what's under the surface

Advanced Search

X-ray photoelectron spectroscopy study of the passive films formed on thermally sprayed and wrought Inconel 625

Bakare, M.S.; Voisey, K.T.; Roe, M.J.; McCartney, D.G.

Authors

M.S. Bakare

K.T. Voisey katy.voisey@nottingham.ac.uk

M.J. Roe

D.G. McCartney



Abstract

There is a well known performance gap in corrosion resistance between thermally sprayed corrosion resistant coatings and the equivalent bulk materials. Interconnected porosity has an important and well known effect, however there are additional relevant microstructural effects. Previous work has shown that a compositional difference exists between the regions of resolidified and non-melted material that exist in the as-sprayed coatings. The resolidified regions are depleted in oxide forming elements due to formation of oxides during coating deposition. Formation of galvanic cells between these different regions is believed to decrease the corrosion resistance of the coating. In order to increase understanding of the details of this effect, this work uses X-ray photoelectron spectroscopy (XPS) to study the passive films formed on thermally sprayed coatings (HVOF) and bulk Inconel 625, a commercially available corrosion resistant Ni-Cr-Mo-Nb alloy. Passive films produced by potentiodynamic scanning to 400mV in 0.5M sulphuric acid were compared with air formed films. The poorer corrosion performance of the thermally sprayed coatings was attributed to Ni(OH)2, which forms a loose, non-adherent and therefore non-protective film. The good corrosion resistance of wrought Inconel 625 is due to formation of Cr, Mo and Nb oxides.
Keywords:

Journal Article Type Article
Publication Date Jan 1, 2010
Journal Applied Surface Science
Print ISSN 0169-4332
Electronic ISSN 0169-4332
Publisher Elsevier
Peer Reviewed Peer Reviewed
Volume 257
Issue 3
APA6 Citation Bakare, M., Voisey, K., Roe, M., & McCartney, D. (2010). X-ray photoelectron spectroscopy study of the passive films formed on thermally sprayed and wrought Inconel 625. Applied Surface Science, 257(3), doi:10.1016/j.apsusc.2010.07.066
DOI https://doi.org/10.1016/j.apsusc.2010.07.066
Keywords Inconel 625 alloy, HVOF thermally sprayed coating, x-ray photoelectron spectroscopy, binding energy, passive films.
Publisher URL http://www.sciencedirect.com/science/article/pii/S0169433210010081
Copyright Statement Copyright information regarding this work can be found at the following address: http://eprints.nottingh.../end_user_agreement.pdf
Additional Information NOTICE: this is the author’s version of a work that was accepted for publication in Applied Surface Science. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Applied Surface Science, 257(3), (2010), doi: 10.1016/j.apsusc.2010.07.066

Files

XPS-KTV-FINAL_(2)after_review_07062010erep.pdf (1.7 Mb)
PDF

Copyright Statement
Copyright information regarding this work can be found at the following address: http://eprints.nottingham.ac.uk/end_user_agreement.pdf





You might also like



Downloadable Citations

;