Skip to main content

Research Repository

Advanced Search

Delivering on sustainable development goals in wastewater reuse for agriculture: Initial prioritization of emerging pollutants in the Tula Valley, Mexico (2023)
Journal Article
Garduño-Jiménez, A., Durán-Álvarez, J., Ortori, C. A., Abdelrazig, S., Barrett, D. A., & Gomes, R. L. (2023). Delivering on sustainable development goals in wastewater reuse for agriculture: Initial prioritization of emerging pollutants in the Tula Valley, Mexico. Water Research, 238, Article 119903. https://doi.org/10.1016/j.watres.2023.119903

Wastewater reuse for agricultural irrigation is a widespread beneficial practice, in line with the sustainable development goals. However, contaminants of emerging concern (CECs) present in wastewater, such as pharmaceuticals, pose... Read More about Delivering on sustainable development goals in wastewater reuse for agriculture: Initial prioritization of emerging pollutants in the Tula Valley, Mexico.

Rational design of hydrogels for immunomodulation (2022)
Journal Article
Bu, W., Wu, Y., Ghaemmaghami, A. M., Sun, H., & Mata, A. (2022). Rational design of hydrogels for immunomodulation. Regenerative Biomaterials, 9, Article rbac009. https://doi.org/10.1093/rb/rbac009

The immune system protects organisms against endogenous and exogenous harm and plays a key role in tissue development, repair and regeneration. Traditional immunomodulatory biologics exhibit limitations including degradation by enzymes, short half-li... Read More about Rational design of hydrogels for immunomodulation.

Light-controlled micron-scale molecular motion (2021)
Journal Article
Samperi, M., Bdiri, B., Sleet, C. D., Markus, R., Mallia, A. R., Pérez-García, L., & Amabilino, D. B. (2021). Light-controlled micron-scale molecular motion. Nature Chemistry, 13(12), 1200-1206. https://doi.org/10.1038/s41557-021-00791-2

The micron-scale movement of biomolecules along supramolecular pathways, mastered by nature, is a remarkable system requiring strong yet reversible interactions between components under the action of a suitable stimulus. Responsive microscopic system... Read More about Light-controlled micron-scale molecular motion.

Modelling the influence of UV curing strategies for optimisation of inkjet based 3D printing (2021)
Journal Article
Zhao, P., He, Y., Trindade, G. F., Baumers, M., Irvine, D., Hague, R., …Wildman Conceptualisation, R. (2021). Modelling the influence of UV curing strategies for optimisation of inkjet based 3D printing. Materials and Design, 208, Article 109889. https://doi.org/10.1016/j.matdes.2021.109889

A predictive model is developed to assist in the design and manufacture of structures by inkjet based 3D printing (IJ3DP)/additive manufacturing. IJ3DP often exploits photopolymerisation to rapidly convert a photoreactive liquid ink into a solid prod... Read More about Modelling the influence of UV curing strategies for optimisation of inkjet based 3D printing.

Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices (2021)
Journal Article
He, Y., Abdi, M., Trindade, G. F., Begines, B., Dubern, J. F., Prina, E., …Wildman, R. D. (2021). Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices. Advanced Science, 8(15), Article 2100249. https://doi.org/10.1002/advs.202100249

As the understanding of disease grows, so does the opportunity for personalization of therapies targeted to the needs of the individual. To bring about a step change in the personalization of medical devices it is shown that multi-material inkjet-bas... Read More about Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices.

Quantitative Bioreactor Monitoring of Intracellular Bacterial Metabolites in Clostridium autoethanogenum Using Liquid Chromatography–Isotope Dilution Mass Spectrometry (2021)
Journal Article
Safo, L., Abdelrazig, S., Grosse-Honebrink, A., Millat, T., Henstra, A. M., Norman, R., …Barrett, D. A. (2021). Quantitative Bioreactor Monitoring of Intracellular Bacterial Metabolites in Clostridium autoethanogenum Using Liquid Chromatography–Isotope Dilution Mass Spectrometry. ACS Omega, 6, 13518-13526. https://doi.org/10.1021/acsomega.0c05588

We report a liquid chromatography–isotope dilution mass spectrometry method for the simultaneous quantification of 131 intracellular bacterial metabolites of Clostridium autoethanogenum. A comprehensive mixture of uniformly 13C-labeled internal stand... Read More about Quantitative Bioreactor Monitoring of Intracellular Bacterial Metabolites in Clostridium autoethanogenum Using Liquid Chromatography–Isotope Dilution Mass Spectrometry.

Subtype selective fluorescent ligands based on ICI 118,551 to study the human ?2?adrenoceptor in CRISPR/Cas9 genome?edited HEK293T cells at low expression levels (2021)
Journal Article
Kellam, B., White, C. W., Goulding, J., Mistry, S. J., Soave, M., Woolard, J., …Hill, S. J. (2021). Subtype selective fluorescent ligands based on ICI 118,551 to study the human β2‐adrenoceptor in CRISPR/Cas9 genome‐edited HEK293T cells at low expression levels. Pharmacology Research and Perspectives, 9(3), Article e00779. https://doi.org/10.1002/prp2.779

Fluorescent ligand technologies have proved to be powerful tools to improve our understanding of ligand-receptor interactions. Here we have characterized a small focused library of nine fluorescent ligands based on the highly selective ?2-adrenocepto... Read More about Subtype selective fluorescent ligands based on ICI 118,551 to study the human ?2?adrenoceptor in CRISPR/Cas9 genome?edited HEK293T cells at low expression levels.

Residual polymer stabiliser causes anisotropic electrical conductivity during inkjet printing of metal nanoparticles (2021)
Journal Article
Trindade, G. F., Wang, F., Im, J., He, Y., Balogh, A., Scurr, D., …Roberts, C. J. (2021). Residual polymer stabiliser causes anisotropic electrical conductivity during inkjet printing of metal nanoparticles. Communications Materials, 2, Article 47. https://doi.org/10.1038/s43246-021-00151-0

Inkjet printing of metal nanoparticles allows for design flexibility, rapid processing and enables the 3D printing of functional electronic devices through co-deposition of multiple materials. However, the performance of printed devices, especially t... Read More about Residual polymer stabiliser causes anisotropic electrical conductivity during inkjet printing of metal nanoparticles.

Browse